Denon AVR-4806CI User Manual download pdf (Page 118)

118

Advanced Setup – Part 1

Volume Limit:

Set the upper limit for the volume for the different

zones.

• –20 dB, –10 dB, 0 dB:

The volume cannot be increased above the

selected levels.

• OFF:

If you do not want to set a volume limit, select

“OFF”.

In this case, the volume can be set to the AVR-

4806CI’s maximum volume (output) level of +18

dB, which is extremely loud.

Press the CURSOR

button to select the

desired setting, then press the

CURSOR

button to select the parameter.

Setting the Volume Control

• Set the upper limit for the volume, the volume level when

the power is turned on, and the volume level when the mute

mode is set for the different zones.

Press the CURSOR

button to select

“Volume Control” at the “Option Setup”

menu, then press the

ENTER button.

• Display the “Volume Control” screen.

Power On Level:

Set the volume that is set when the power is

turned on for the different zones.

You can adjust the volume level within the range of

–80 to +18 dB in steps of 1.0 dB.

• – – – (Mute)

The volume is always muted when the power is

turned on.

• LAST

The volume set when the AVR-4806CI was last

used is stored in the memory and set when the

power is turned on.

Press the ENTER button to enter the setting.

• The “Option Setup” menu reappears.

Mute Level:

Set the volume attenuation level when the mute

mode is set for the different zones.

• FULL

The volume is fully muted.

• –40 dB

The volume is lowered 40 dB from the current

level.

• –20 dB

The volume is lowered 20 dB from the current

level.

Volume Level:

Set whether to fix the output level for the different

zones or make it variable.

• Variable

The level can be adjusted freely using buttons on

the remote control unit.

• –40 dB, 0 dB

The output level is fixed at the set level and the

volume can no longer be adjusted.

• For ZONE2 and ZONE3, the “Volume Limit” and “Power On

Level” can be set when “Variable” is selected for “Volume

Level”.

•When the power amplifier is assigned to either of the

ZONE2 and ZONE3 channels at “Power Amp Assign”,

“–VAR–” (only variable) is displayed and the fixed level

cannot be set.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 201 202

Comments to this Manuals

No comments

Denon AVR-4806CI User Manual Page 118

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-4806CI