Denon AVR-4806CI User Manual download pdf (Page 47)

Basic Operation

¢ Input mode display

• In the AUTO mode

• In the DIGITAL PCM mode

• In the DIGITAL DTS mode

• In the ANALOG mode

Depending on the input signal.

• In the EXT. IN mode

Press the ANALOG button on the main unit or

INPUT MODE button on the remote control unit to

switch to the analog input.

¢ Selecting the analog mode

ANALOG (exclusive analog audio signal playback mode):

The signals input to the analog input terminals are

decoded and played.

NOTE:

• Input mode when playing DTS sources:

Noise will be output if DTS-compatible CDs or LDs are

played in the “ANALOG” or “PCM” mode.

When playing DTS-compatible sources, be sure to

connect the source component to the digital input

terminals (OPTICAL/COAXIAL) and set the input mode to

“DTS”.

¢ Input signal display

• DOLBY DIGITAL

• DTS

• PCM

Depending on the input signal.

• The “HDCD” indicator lights when digital

signals are being input with a player that

supports HDCD playback.

Depending on the input signal.

• The “DSD” indicator lights when the DENON

LINK or IEEE1394 have been connected and

the DSD signals have been inputted (

page 34, 37).

Press the INPUT MODE button.

The mode switches as shown below each time the

INPUT MODE button on the main unit is pressed:

¢ Selecting the AUTO, PCM and DTS modes

AUTO PCM DTS

AUTO

EXT.IN ANALOG

PCM DTS

The mode switches as shown below each time the

INPUT MODE button on the remote control unit is

pressed:

(Remote control unit)

When operating the remote control unit:

AUTO (All auto mode):

In this mode, the types of signals being input to the

digital and analog input terminals for the selected input

source are detected and the program in the AVR-

4806CI’s surround decoder is selected automatically

upon playback. This mode can be selected for all input

sources other than PHONO and TUNER.

The presence or absence of digital signals is detected,

the signals input to the digital input terminals are

identified and decoding and playback are performed

automatically in DTS, Dolby Digital or PCM (2 channel

stereo) format. If no digital signal is being input, the

analog input terminals are selected.

Use this mode to play Dolby Digital signals.

DTS (exclusive DTS signal playback mode):

Decoding and playback are only performed when DTS

signals are being input.

PCM (exclusive PCM signal playback mode):

Decoding and playback are only performed when PCM

signals are being input.

Note that noise may be generated when using this

mode to play signals other than PCM signals.

Input mode

• The AVR-4806CI has an AUTO signal detection mode that

automatically identifies the type of incoming audio signals,

but is also equipped with a manual mode that can be

switched according to the type of input audio signals.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 201 202

Comments to this Manuals

No comments

Denon AVR-4806CI User Manual Page 47

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-4806CI