Denon AVR-4806CI User Manual download pdf (Page 131)

131

Advanced Setup – Part 2

• Please set all THX Certified speakers to small and the

crossover to 80 Hz.

•We recommend using with the crossover frequency set to

“FIXED–THX–”, but depending on the speaker, setting it to a

different frequency may improve frequency response near

the crossover frequency.

• The crossover frequency mode is valid only when subwoofer

is set to ON, and when one or more speakers are set to

SMALL, as described in section “Speaker Configuration”

settings ( page 125, 126).

Press the CURSOR

button to select

“Advanced” at the “Crossover Frequency”

screen.

Press the CURSOR

button to select the

speaker to be set.

• If “LFE–THX–” is selected at “Subwoofer Setup”, the

frequencies can only be selected for speakers set to “Small”

at “Speaker Configuration”.

• If “LFE+Main” is set at “Subwoofer Setup”, the frequencies

can be selected regardless of the speaker size setting.

Selecting the Surround Speakers for the

different surround modes

• This menu is displayed when both surround speakers A and

B are used.

• At this screen preset the surround speakers to be used in

each surround modes.

Press the CURSOR

button to select

“Surround Sp Setup” at the “Speaker Setup”

menu, then press the

ENTER button.

• Display the “Surround Sp Setup” screen.

• If “LFE+Main” is set at “Subwoofer Setup”, “SW:LFE+Main”

( page 126, 127) is displayed at the top right of the

screen.

Press the CURSOR

button to select the

frequency.

Setting the crossover frequency individually for

the different channels

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 201 202

Comments to this Manuals

No comments

Denon AVR-4806CI User Manual Page 131

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-4806CI