Denon AVR-4806CI User Manual Page 129

  • Download
  • Add to my manuals
  • Print
  • Page
    / 202
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 128
129
Advanced Setup – Part 2
3
Press the CURSOR
DD
or
HH
button to select
“Surr. Sp.”, then press the
CURSOR
FF
or
GG
button to select the surround speaker(s) from
which you want to produce the test tone (A, B
or A+B).
Surr. Sp. : A
Adjusts the balance of the playback level between
the channels when using surround speaker A.
Surr. Sp. : B
Adjusts the balance of the playback level between
the channels when using surround speaker B.
Surr. Sp. : A + B
Adjusts the balance of the playback level between
the channels when using surround speakers A and
B at the same time.
The “Surr. Sp.” can only be selected when both
surround speakers A and B have been selected at the
System Setup Menu (when both A and B have been
set to “Large” or “Small”).
4
Press the CURSOR
DD
or
HH
button to select
“Test Tone Start”, then press the
CURSOR
FF
button to select “Yes”.
5
-1
When “Auto” mode is selected:
Press the
CURSOR
FF
or
GG
button to adjust all
the speakers to the same volume.
The test tones are emitted from each speaker in the
following order, at 4 seconds intervals the first time
and second time around, 2 seconds intervals the
third time around and on:
The volume can be adjusted between –12 dB and +12
dB in units of 0.5 dB.
5
-2
When “Manual” mode is selected:
Press the
CURSOR
DD
or
HH
button to select the
speaker, then press the
CURSOR
FF
or
GG
button
to adjust all the speakers to the same volume.
Example: “Manual” mode is selected.
6
Press the ENTER button to enter the setting.
The “Channel Level” screen reappears.
FL
SW
1spkr
2spkrs
C
FR
SR
SBL
SL
SB
SBR
When the surround back speaker setting is set to
“1spkr” for “Speaker Configuration”, this is set to
“SB”.
Example: When the volume is set to –11.5 dB while
the test tone is being produced from the
Front L ch speaker
•To cancel the settings, press the CURSOR
FF
button to select
“Level Clear” and “Yes” on the “Channel Level” screen,
then make the settings again.
Page view 128
1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 201 202

Comments to this Manuals

No comments