Denon AV Surround Receiver AVR-5803 Operations Instructions download pdf (Page 26)

After the above settings are completed, press jog stick "ENTER"

The "Channel Level" screen reappears

Press jog stick "ENTER" again to return to the System Setup Menu screen

"_ To cancel the settings, select "Level Clear" and "Yes" on the "Channel Level" screen, then make the settings again

The level of each channel should be adjusted to 75 dB (C-weighted, slow meter mode) on a sound level meter at the listening position.

If a sound level meter is not available adjust the channels by ear so the sound levels are the same. Because adjusting the subwoofer level test

tone by ear is difficult, use a well known music selection and adiust for natural balance.

NOTE: When adjusting the level of an active subwoofer system, you may also need to adjust the subwoofer's own volume control

When you adiust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affect

ALL surround modes Consider this mode a Master Channel Level adjustment mode.

After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then activate the individual surround modes and

adjust channel levels that will be remembered for each of those modes. Then, whenever you activate a particular surround sound mode,

your preferred channel level adjustments for just that mode will be recalled Check the instructions for adjusting channel levels within each

surround mode on page 48.

You can adjust the channel levels for each of the following surround modes: DIRECT, STEREO, 5CH/7CH STEREO, DOLBY/DTS SURROUND,

HOME THX CINEMA, WIDE SCREEN, SUPER STADIUM, ROCK ARENA, JAZZ CLUB, CLASSIC CONCERT, MONO MOVIE, and MATRIX

When using either surround speakers A or B, or when using surround speakers A and B at the same time, be sure to adjust the balance of

playback levels between each channel for the various selections of "A or B" and "A and B".

Make these settings when "Yes" is selected for the subwoofer in the Speaker Configuration settings.

There is not displayed when "No" selected. (page 20)

Select "THX Audio Setup" on the System Setup Menu screen

System Setup Menu

Speaker Configuration

Delay Time

Channel Level

7THX Audio Setup

S=bwooferPeak Limit Lev.

Digltal In Assignment

Video Input Mode

Press jog stick "ENTER" to switch to the THX Audio Setup screen.

Select "Boundary Gain Compensation", then press

jog stick "ENTER"

THX Audio Setup

_Boundary Gain

Compensatlon

Surround Back

Speaker Position

Exit

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 83 84

No comments

Denon AV Surround Receiver AVR-5803 Operations Instructions Page 26