Denon AVR-1613 Owner's Manual download pdf (Page 127)

124

Speciﬁcations

n Audio section

•Power ampliﬁer

Rated output: Front:

75 W + 75 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)

120 W + 120 W (6 Ω, 1 kHz with 0.7 % T.H.D.)

Center:

75 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)

120 W (6 Ω, 1 kHz with 0.7 % T.H.D.)

Surround:

75 W + 75 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)

120 W + 120 W (6 Ω, 1 kHz with 0.7 % T.H.D.)

Output connectors: 6 – 16 Ω

•Analog

Input sensitivity/Input impedance: 200 mV/47 kΩ

Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)

S/N: 98 dB (IHF–A weighted, DIRECT mode)

n Video section

•Standard video connectors

Input/output level and impedance: 1 Vp-p, 75 Ω

Frequency response: 5 Hz – 10 MHz — 0, –3 dB

n Tuner section [FM]

(Note: μV at 75 Ω, 0 dBf = 1 x 10

–15

Receiving Range: 87.5 MHz – 107.9 MHz

Usable Sensitivity: 1.2 μV (12.8 dBf)

50 dB Quieting Sensitivity: MONO 2.8 μV (20.2 dBf)

S/N : MONO 70 dB (IHF–A weighted, DIRECT mode)

STEREO 67 dB (IHF–A weighted, DIRECT mode)

Total harmonic Distortion: MONO 0.7 % (1 kHz)

STEREO 1.0 % (1 kHz)

n General

Power supply: AC 120 V, 60 Hz

Power consumption: 360 W

0.1 W (Standby)

0.5 W (CEC standby)

For purposes of improvement, speciﬁcations and design are subject to change without notice.

Basic version

Advanced version

InformationInformation

1 2 ... 122 123 124 125 126 127 128 129 130 131

No comments

Denon AVR-1613 Owner's Manual Page 127