Denon DN-S3700 Owner's Manual download pdf (Page 10)



Connections Playback SpeciﬁcationsBasic Operations Memo Function Utility

Q4 CLR1, CLR2, CLR3 buttons

These clear the hot start points or the auto loop

playback start points.

Q5 EXIT button

When the

EXIT button is pressed during auto

loop playback, auto looping is canceled and

normal playback resumes.

Q6 Vibrant Tube Display

The display provides various information relating

to playback, title, position, time and others.

Q7 MIDI button

This sets the MIDI mode and starts the USB

MIDI control mode.

Q8 USB button

This sets the USB mode. Use this button to play

ﬁles on USB devices.

Q9 CD button

This sets the CD mode. Use this button to play

CDs and MP3 ﬁles on CD-ROMs.

W0 FLIP, -CLR button

⋅

FLIP:

When the A point is set, the

FLIP button

provides two modes of operation, Hot Start

mode and Stutter mode.

The display will indicate “H/S” or “STR”.

⋅

CLR:

You are able to clear the, A or B points individually

as well as both points simultaneously. To clear

A or B, push the

FLIP button ﬁrst, followed by

the

A or B buttons. To clear both points, press

and hold the

FLIP button for 2 seconds.

W1 TIME button, -UTILITY button

⋅

TIME:

The display switches between “ELAPSED”

(elapsed time), “REMAIN” (remaining time),

“T.ELAPSED” (total elapsed time) and

“T.REMAIN” (total remaining time) each time

the button is pressed.

W8 A/B TRIM buttons

When pressed during seamless looping, the

mode for adjusting seamless loop point A or B

is set.

W9 PARAMETERS knob

⋅

PARAMETERS:

When the

PARAMETERS knob is turned,

the Platter effect, memo, preset or other

parameters and data can be selected.

⋅

FILE SEARCH:

When the

PARAMETERS knob is turned while

pressing it, the letter search mode is set.

⋅

TRACK SEARCH, Playlist, FILE SEARCH:

When the

PARAMETERS knob is pressed,

tracks (ﬁles) can be selected one track at a

time.

When the

PARAMETERS knob is turned while

pressing it, tracks (ﬁles) can be selected in

units of 10.

When using CD and CD-ROM discs.

E0 BACK button

Press this button to return to the previous

screen.

A long-press shall return to the top menu.

E1 PLAYLIST button

The mode switches between ﬁle search and

playlist search each time this button is pressed

in the USB play mode.

E2 PITCH SLIDER

Use this slider to adjust playing speed.

The playing speed decreases when sliding

upwards and increases downwards.

E3 PITCH BEND +/– buttons

• Pushing these buttons will change main playing

speed temporarily.

• While pushing

PITCH BEND + button the playing

speed increases and speed decreases while

pushing

PITCH BEND – button.

• When release button, playing speed returns to

the previous speed.

E4 PITCH button

The pitch range switches as follows each time the

button is pressed: Pitch off

±6 % ±10 %

±16 % ±100 % Pitch off.

The PITCH LED lights in all cases, except when

the pitch mode is turned off.

E5 KEY ADJUST button

Use this to turn the key adjust mode on and off.

E6 PLATTER MODE button

When this button is pressed, the Platter disc

operation mode can be selected.

⋅

CLASSIC VINYL: (Spinning)

When the Platter mode is set to the classic Vinyl

mode, operation like a turntable is possible by

touching the spinning Vinyl disc.

⋅

BEND/SEARCH:

When the PLATTER Source is set to BEND

during playback, it alternates as the pitch

bend function. The display will indicate “Bend”.

When PLATTER Source is set to Search,

during Pause or CUE mode, it alternates as the

Manual Search function. Manual search allows

you to move the CUE point around by one

frame at a time (1/75 second) with an audible

frame-repeat sound. The display will indicate

“Search”.

E7 Vinyl disc

The Vinyl playback, manual search and pitch

bend can be selected. In the ﬁle search mode,

the ﬁle can be selected.

E8 REVERSE button

Push this button to set the REVERSE.

E9 DUMP button

Push this button to set the DUMP.

R0 BRAKE button

Push this button to set the BRAKE and adjust

the parameter.

R1 DISC EJECT button

When the button is pressed, the CD is ejected.

Ejection is locked while a CD is playing.

R2 Strobo Indicator

It can check the relative change in tempo when

the red strobe light reﬂects on the three rows of

strobe dots on the peripheral edge of the platter

when rotating.

Upper dots: When the dots appear to be

stationary, the pitch setting is changed about

+3.5 %.

Center dots: When the dots appear to be

stationary, the pitch setting is ±0 % (33 rpm or

45 rpm).

Lower dots: When the dots appear to be

stationary, the pitch setting is changed about

–3.5 %.

NOTE

It is not possible to switch the total elapsed time

and total remaining time when searching for ﬁles in

the USB mode.

⋅

UTILITY:

The Utility mode is set when this button is

longpressed while the player is in the Cue

mode.

Getting Started

W2 TITLE/ID3 button, -CONT./SINGLE button

⋅

TITLE:

CD mode ··························································

Each time the button is pressed when there

is CD text data, the display switches between

the “Artist”, “Album”, “Title” and the display

shown before the display was switched.

USB and CD-ROM mode ·································

When the button is pressed while in the USB

mode, the display switches between the

“Artist”, “Album”, “Title”, “Genre”, “Year” and

the display shown before the display was

switched.

⋅

CONT. SINGLE:

The display switches between the single play

mode (PLAY LOCK), single play mode (LOCK

OFF) and continuous play each time the button

is pressed and held in for over 1 second.

⋅

SINGLE PLAY LOCK (Single play & play lock)

“Single play & play lock” can be selected in the

“PRESET” settings. When “Single play & play

lock” is selected, the single play mode is set.

In this mode, ﬁles cannot be selected during

playback, thus preventing ﬁles from being

selected or playback stopped accidentally.

W3 DISPLAY button, -RELAY button

⋅

DISPLAY:

Use this button switch the waveform display.

The display switches as follows each time the

button is pressed:

1. Character display + Waveform display

Waveform display + Display of various points

b For the waveform display, when in the USB

mode, the waveform is only displayed when

waveform data is stored in the ID3 tag data.

⋅

RELAY:

You can turn the RELAY mode ON/OFF when

this button is pressed held for over 1 second.

W4 A button

Using this button you can create starting point

for Hot Start, Seamless Loop and Stutter.

W5 B button

Use this to set the B point for to create a

Seamless Loop after the A point has been set.

W6 EXIT/RELOOP button

Use this to exit or return back again to Seamless

loop playback. You can add variety to looping

with this function.

W7 NEXT TRACK button

When the button is pressed during playback, the

next track mode is selected.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments

Denon DN-S3700 Owner's Manual Page 10

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-S3700