Connections Playback Specifications
Basic Operations Memo Function Utility
Front Panel
q
w y uret iq
Rear Panel
q Disc loading slot
Insert CDs here. Insert the CD slowly, then
release it.
q Fader start terminal
• Connect this terminal to a compatible mixer.
The various fader commands (play, pause, cue,
etc.) are received from the mixer.
• Use a 3.5 mm stereo mini cord for connection.
w Analog output terminals (LINE OUT)
• This is unbalanced RCA output terminals.
• Audio signals outputs.
e Digital output terminal (DIGITAL OUT)
• Digital data is available from these terminals.
• Use 75 Ω/ohms pin cord for connection.
• We recommend you use braided wire type
shielded cable.
r PS/2 connector
Terminal for connecting a PS/2 keyboard.
t D-LINK connector
Terminal for connecting another DN-S3700.
Exchange of memo data, keyboard data and
relay command information is performed with
another DN-S3700.
b Do not connect anything other than a DN-
S3700.
b Use an RJ45 cross cable no longer than 3
meters for connection.
NOTE
The playback level after analog conversion is set
to –6 dB below the usual level to avoid digital
distortion.
y USB B port
• USB MIDI and HID commands are sent from the
DN-S3700 to the computer.
• USB MIDI and HID commands as well as USB
AUDIO signals are received from the computer.
u USB A port
Only one mass storage device (USB memory,
USB HDD, etc.) can be connected.
b Not compatible with USB hubs
i POWER ON/OFF button
Push this button to turn power on and off.
NOTE
Do not turn off the power while a disc is loading or
ejecting. Doing so could damage the CD mechanism
and lead to malfunction.
Getting Started
Comments to this Manuals