Denon AVR-1311 Owner's Manual download pdf (Page 14)

ENGLISH

Set up speakers

Remote control operation

buttons

Move the cursor

(Up/Down/Left/Right)

Conﬁ rm the setting Return to previous menu

Use ui to select “Mode”, and use

o p to select a detailed setting.

Mode :• LFE –

Mode

Select low range signals to be

reproduced by subwoofer.

• LFE : The low range signal of the channel set to

“Small” speaker size is added to the LFE signal

output from the subwoofer.

• LFE+Main : The low range signal of all channels

is added to the LFE signal output from the

subwoofer.

• “Mode” can be set when “Speaker Conﬁ g.” –

“SW” (vpage7) is set to “Yes”.

• Play music or a movie source and select the

mode offering the strongest bass.

• Select “LFE+Main” if you want the bass signals

to always be produced from the subwoofer.

NOTE

If “Front” and “Center” for “Speaker Conﬁ g.”

are set to “Large”, and “Mode” is set to “LFE”,

no sound may be output from the subwoofers,

depending on the input signal or selected

surround mode.

Press ENTER to enter the setting.

Bass Setting

Use ui to select “Bass Setting”, and

then press ENTER.

Bass Setting

LFE •120Hz–

Use o p to select the frequency.

LFE

Set LFE signal playback range.

• 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz

/ 200Hz / 250Hz

Use ui to select “Distance”, and

then press ENTER.

Distance

Meters :• 0.1m–

Use o p to change the step (minimum

variable distance).

0.1m : For changing in 0.1-meter steps.

0.01m : For changing in 0.01-meter steps.

Bass Setting

Default settings are underlined.

Distance

Default settings are underlined.

Use ui to select a speaker, and use

o p to select distance.

FL / FR / C / SW / SL / SR / SBLz / SBRz

Select the speaker.

zWhen the “Speaker Conﬁ g.” – “S.B(Pre)”

(vpage 7) setting is set to “None”,

“SBL” and “SBR” is not displayed.

• 0.00m – 18.00m : Set the distance.

• The speakers that can be selected differ

depending on the “Speaker Conﬁ g.” (vpage7)

settings.

• Default settings :

FL / FR / C / SW : 3.6 m

SL / SR / SBL / SBR : 3.0 m

• Set the difference in the distance between the

speakers to less than 6.0 m.

NOTE

Speakers set to “None” in “Speaker Conﬁ g.”

(vpage7) are not displayed.

Press ENTER to enter the setting.

Distance

1.AVR1311E2_ENG_3rd_100617.indd Sec:81.AVR1311E2_ENG_3rd_100617.indd Sec:8 2010/06/17 18:24:102010/06/17 18:24:10

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 63 64

Comments to this Manuals

No comments

Denon AVR-1311 Owner's Manual Page 14

Comments to this Manuals

Related products and manuals for Receiver Denon AVR-1311