Denon AVR-889 Owner's Manual download pdf (Page 32)



ENGLISH

Getting Started Connections Playback Remote Control Multi-zone Information Troubleshooting

Speciﬁcations

For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 17).

F Menu screen F

2.Manual Setup

2.HDMI Setup

1.Speaker Setup

4.ZONE2 Setup

5.Option Setup

3.Audio Setup

Option Setup

Make various other settings.

Amp Assign

Deﬁne how the ampliﬁer for the surround back speaker channels

is used.

The places where the surround back ampliﬁer are used can be set

freely according to the usage environment. This makes it possible to

output sound to rooms other than the room (the MAIN ZONE) where

surround playback is performed (multi-zone playback) or play the sound

with high quality using the front speakers (bi-amp connections).

[Selectable items]

7.1ch

: The surround back channel is output from the

speakers connected to the SURR.BACK/AMP

ASSIGN terminals.

ZONE2

: When ZONE2 power is on, ZONE2 sound is

emitted from the speaker connected to the SURR.

BACK/AMP ASSIGN terminal.

FrontA Bi-Amp

: The Front A channel for Bi-Amp use is output from

the speakers connected to the SURR.BACK/AMP

ASSIGN terminals.

FrontB Bi-Amp

: The Front B channel for Bi-Amp use is output from

the speakers connected to the SURR.BACK/AMP

ASSIGN terminals.

For details, see “Amp Assign / Multi-zone Connections and Operations”

(vpage 60 ~ 62).

2.Vol.Control

3.Source Delete

4.On-Screen Display

5.Quick Select Name

6.Remote ID Setup

7.Display

8.Setup Lock

1.Amp Assign

2-5.Option Setup

Volume Control

Set the MAIN ZONE volume setting.

Volume Limit

Make a setting for maximum volume.

[Selectable items]

OFF

: Do not set a maximum volume.

–20dB

: Set the maximum volume to –20 dB.

–10dB

: Set the maximum volume to –10 dB.

0dB

: Set the maximum volume to 0 dB.

Power On Level

This sets the volume set when the MAIN ZONE’s power is turned

on.

[Selectable items]

Last

: Use the memorized setting from the last session.

– – –

: Always use the muting on condition when power

is turned on.

[Variable range]

–80dB ~ +18dB

: Set the volume level when the power is turned on

in units of 1 dB.

Mute Level

This sets the amount of attenuation of the volume when the mute

mode is set in the MAIN ZONE.

[Selectable items]

Full

: The sound is cut off entirely.

–40dB

: The sound is attenuated by 40 dB.

–20dB

: The sound is attenuated by 20 dB.

Source Delete

Remove input sources that are not used from the display.

[Selectable items]

: Use this source.

Delete

: Do not use this source.

On-Screen Display

Make on-screen display related settings.

See page 8 for more information on onscreen displays due to

input signals.

NOTE

• Input sources being used in the various zones cannot be deleted.

• Input sources set to “Delete” cannot be selected using SOURCE

SELECT.

Text

Input source and mode display.

[Selectable items]

: Turn display on.

OFF

: Turn display off.

Screensaver

Make screensaver settings.

Use the screensaver to prevent burn-in on the monitor screen.

When set to “ON”, the screensaver is activated if there is no activity

for about 3 minutes.

[Selectable items]

: Activate the screensaver if there is no activity for about 3

minutes.

OFF

: Turn the screensaver function off.

Default

Reset the settings to the default values.

Setup

When “Screensaver” is set to “ON” , the screensaver is activated if

no operation is performed for about 3 minutes.

When you press uio p, the screen saver is cancelled and the

screen before that screen saver started is displayed.

1.AVR889_ENG_107.indd 32 2008/08/01 11:37:11

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 79 80

Comments to this Manuals

No comments

Denon AVR-889 Owner's Manual Page 32

Comments to this Manuals

Related products and manuals for Receiver Denon AVR-889