Denon DN-F650R Owner's Manual Page 51

  • Download
  • Add to my manuals
  • Print
  • Page
    / 54
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 50
Getting started
Part names
and functions
Connections Control function Specifications IndexSetting defaults Recording Play
USB mode and
the computer
File/Folder
settings
43
Information
If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the external devices (mixer and player) operating properly?
If this unit does not operate properly, check the items listed in the table below.
If the symptom is not covered on the check list, contact your dealer or service centers.
Service centers are listed at http://www.d-mpro.com.
GGeneralH
Symptom Cause/Solution Page
Does not turn on the
power.
Check whether the power cord is firmly connected to the AC
outlet.
8
GRecordingH
Symptom Cause/Solution Page
Cannot perform
recording.
The recording media could be the cause of this trouble. Replace
the recording media with another one and retry.
16
Although the music
has been recorded
properly, no sound is
reproduced when it is
played back.
Make sure that the recording level adjustment switch (REC
LEVEL) is not set to MIN.
Make sure that the recording settings (such as input source
and selected recording media) and all connections with external
devices are correct.
(For example, make sure to set the audio input source for
recording to "Unbalance" and connect an external device to the
analog input (RCA) terminal. Otherwise, the unit will record the
music in silent mode.)
16
7
There are sound
cutoffs between files.
There may be minor sound cutoffs between files depending on
the capacity of a recorded file.
12, 17
There are sound
cutoffs during
recording to an SD
card.
If an SD card is formatted on a computer, it may cause sound
cutoffs during recording. When you use an SD card with this unit,
make sure to format the card on this unit.
14
There is a loud noise
in the recorded file.
Check the level meter and Level Over Display (LEVEL) to make
sure that the recording level does not exceed 0dB.
Make sure that the electrical contacts of the cable connections
are not poor.
16
7
Cannot perform
cascade recording.
Cascade recording is not performed if the USB drive is not
connected to the unit or if there is no recording space left on the
USB drive.
During recording to the USB drive, no cascade recording is
performed.
17
17
GPlaybackH
Symptom Cause/Solution Page
Cannot perform
playback or does not
recognize a file.
The recording media could be a cause of this trouble. Copy a file
to another recording media and retry playback.
Check whether this unit supports the format of the playback file.
Check whether a target folder is stored immediately under the
root folder of the recording media. This unit recognizes only the
folders stored immediately under the root folder.
Check whether the number of folders does not exceed 32. This
unit recognizes up to 32 folders.
23
23
Symptom Cause/Solution Page
No sound is produced
from the headphones.
Make sure that the headphone volume level adjustment switch
(LEVEL) is not set to MIN.
Check whether sound is reproduced from the headphones by
using another audio file or recording media.
8
Poor sound quality
for playback on a
computer.
Check the quality of the sound card and program of your computer.
Check the frequency conversion program.
This unit can record audio files using sampling frequencies of 48kHz
and 96kHz. Some of the computer programs convert the frequency
to 44.1kHz (a sample rate converter is used). Use a higher quality
sample rate converter.
Cannot read the files
on a computer.
Check the functions of the computer program. Some playback and
editing programs may not support the recording format of this unit
(PCM 24 bits, 96kHz, etc.).
If the operation of this unit is unstable, turn off the power and
disconnect the power cord. Then, restart the unit.
GRecording mediaH
Symptom Cause/Solution Page
Recording media
(USB or SD) icon is
not displayed when
a recording media is
connected.
Sometimes this unit cannot recognize a recording media because
of a defective connection. Check the connection of the recording
media.
This unit supports USB mass-storage class flash memory and
USB external storage. It does not recognize USB drives other than
the above.
You cannot connect USB devices to this unit via a USB hub.
8
9
9
The recording media
icon is displayed, but
the unit does not
recognize a file.
Check the display and make sure that the currently selected
recording media and the actual recording media that you want to
use are the same. If they are not the same, display the recording
media list to select the recording media to be used.
25
Cannot format a USB
drive.
Make sure that an SD card is not connected to this unit. If an SD
card is connected to the unit, it is selected for formatting with
higher priority.
14
GOperationH
Symptom Cause/Solution Page
Cannot add a character
during renaming.
If the maximum number of characters has been already entered,
you cannot add any more characters. To add a character, delete
characters before adding.
13
Cannot delete a folder. When there is only one folder on a recording media, you cannot
delete this folder.
24
Troubleshooting
Page view 50
1 2 ... 46 47 48 49 50 51 52 53 54

Comments to this Manuals

No comments