Denon AVR-4806CI User Manual download pdf (Page 142)

Symptom Cause Measures Page

142

Troubleshooting

The HDMI audio is not output.

• The AVR-4806CI does not play HDMI audio

signals.

• The HDMI audio signals are not output from

the connected monitor device.

• Set the HDMI audio playback setting at the

“HDMI/DVI In Assign” settings to “AMP”.

• Set the HDMI audio playback setting at the

“HDMI/DVI In Assign” settings to “TV”.

106, 107

Power has turned off and the

power indicator is flashing red.

• The set’s internal temperature has risen and

the protection circuit has been activated.

• The core wires of the speaker cables are

touching each other or the AVR-4806CI’s rear

panel, activating the protection circuit.

•AVR-4806CI is malfunctioning.

• Put the AVR-4806CI in a well-ventilated place.

•Turn off the power, then wait for the set to

fully cool off before turning the power back on.

• Check the connections of all the speaker

cables.

•Turn off the power and contact a DENON

customer service center.

Sound is only produced from the

center speaker.

•You are playing a monaural source (TV, AM

radio broadcast, etc.) in the DOLBY/DTS

SURROUND or HOME THX CINEMA mode.

• When playing monaural sources, select a

surround mode other than DOLBY/DTS

SURROUND or HOME THX CINEMA.

61, 62

An image is not projected with

an HDMI/DVI-D connection.

•AVR-4806CI’s HDMI output terminals and

monitor’s input terminals are not properly

connected.

• No HDMI/DVI-D signal is being input.

• The connected monitor equipment or other

equipments do not support HDCP.

• The output format of the connected player

(HDMI/DVI-D FORMAT) does not matche the

supported input format of connected monitor

equipments.

• Check the HDMI connection.

•Properly select HDMI or DVI-D signal input

source.

• The AVR-4806CI will not output video signal

unless the other equipment supports HDCP.

• Check whether the output format of the

connected player (HDMI/DVI-D FORMAT)

matches the supported input format of

connected monitor equipments.

35, 36

106, 107

35, 36

“CHECK ANTENNA” is displayed

in the XM mode.

•AVR-4806CI’s XM terminal and the XM

Passport System is not properly connected.

• Check that the connection are correct. 39

“NO SIGNAL” is displayed in the

XM mode.

• The signal cannot be received. • Reposition your XM Pasport System.

“OFF AIR” is displayed in the XM

mode.

• The selected channel is not currently

broadcasting.

• Select the another channel.

71, 72

Receiving only XM channels 0

and 1.

• The XM Tuner is not activated. • Contact XM Satellite Radio.

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 201 202

Comments to this Manuals

No comments

Denon AVR-4806CI User Manual Page 142

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-4806CI