Denon AVR-590 User Manual download pdf (Page 43)

0

Getting Started

Connections Remote Control Information Troubleshooting

Speciﬁcations

ENGLISH

Settings

Setting items Setting contents

Center Image

Assign center channel signal

to front left and right channels

for wider sound.

0.0 ~ 1.0 (0.3)

Panorama

Assign front L/R signal also

to surround channels, for

wider sound.

ON : Set.

OFF : Do not set.

Dimension

Shift sound image center

to front or rear, to adjust

playback balance.

0 ~ 6 (3)

Center Width

Assign center channel signal

to front left and right channels

for wider sound.

0 ~ 7 (3)

Delay Time

Adjust delay time to control

sound stage size.

0ms ~ 300ms (30ms)

Effect Level

Adjust the strength of the

surround effect.

1 ~ 15 (10)

Set to a lower level if the positioning and sense of phase of the

surround signals seems unnatural.

Room Size

Determine size of acoustic

environment.

NOTE

“Room Size” does not

indicate the size of the room

in which sources are played.

Small : Simulate acoustics of a small room.

Medium small : Simulate acoustics of a medium-small room.

Medium : Simulate acoustics of a medium room.

Medium large : Simulate acoustics of a medium-large room.

Large : Simulate acoustics of a large room.

Adjusting the Sound Field Effect (Parameter)

Setting items Setting contents

AFDM (Auto Flag Detect

Mode)

Detects the source’s surround

back channel signal and sets

the optimum surround mode

automatically.

ON : Set.

OFF : Do not set.

Surround Back

Sets the method of

generating of the surround

back channel.

n For 2-channel sources

ON : The surround back channel is used.

OFF : No signal is played from the surround back channels.

n For multi channel sources

Set this to set the method of generating of the surround back channel

for sources that do not include surround back signals and when you

do not want to play the surround back signals included in the source.

Check the audio signals of the source being played before making this

setting.

OFF : No signal is played from the surround back channels.

MTRX ON : Generate and play the surround back signals from the

surround channel signals.

PLgx CINEMA

1 : Generate and play the surround back signals by

decoding the signals in the “Dolby Pro Logic gx Cinema” mode.

PLgx MUSIC

2 : Generate and play the surround back signals by

decoding the signals in the “Dolby Pro Logic gx Music” mode.

ES MTRX : Generate and play the surround back signals from the

surround channel signals of the DTS source.

ES DSCRT

3 : Play the surround back signals included in the 6.1-

channel DTS source.

DSCRT ON

3 : Play the surround back signals included in the 7.1-

channel source.

1 : This can be selected when “S.Back” in the “Speaker Conﬁg.”

settings (vpage 25) is set to “2ch”.

2 : This can be selected when “S.Back” in the “Speaker Conﬁg.”

settings (vpage 25) is set to “2ch” or “1ch”.

3 : When “AFDM” is set to “ON”, the surround back channel is played

with the AFDM function. When selected while “AFDM” is set to

“OFF”, the source’s surround back signals are played.

This can also be set by pressing .

NOTE

This is valid when the “Pre Assign” setting (vpage 24) is set to “7.1-

channel surround back” or “6.1-channel surround back”, and when the

“S.Back” setting (vpage 25) is set to “Large” or “Small”.

: Moves the cursor (Up/Down/Left/Right)

: Decision the setting

: Return to previous menu

Remote control

operation buttons

Displaying the menu

Cancel the menu

Playback

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 66 67

Comments to this Manuals

No comments

Denon AVR-590 User Manual Page 43

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Denon AVR-590