Denon AVR-1912 Owner's Manual download pdf (Page 103)

100

Input Mode (Audio) Default settings are underlined.

The input modes available for selection may vary depending on the input source.

Setting items Setting details

Input Mode

Set the audio input modes

for the different input

sources.

It is normally recommended

to set the audio input mode

to “Auto”.

Auto : Automatically detect input signal and perform playback.

HDMI : Play only signals from HDMI input.

Digital : Play only signals from digital input.

Analog : Play only signals from analog input.

•“HDMI” can be set for input sources for which “HDMI” is assigned at

“Input Assign” (vpage98).

•“Digital” can be set for input sources for which “Digital” is assigned at

“Input Assign” (vpage98).

•If the input source is set to “TV”, “GAME1” or “GAME2”, it cannot be

set to “Analog”.

•When digital signals are properly input, the indicator lights on

the display. If the indicator does not light, check the digital input

connector assignment and the connections.

•If “HDMI Control” is set to “ON” and a TV compatible with the ARC is

connected via the HDMI MONITOR connectors, the input mode whose

input source is “TV” is ﬁxed to ARC.

Decode Mode

Set the audio decode mode

for input source.

DVD

SAT/CBL

GAME1

GAME2

V.AUX

DOCK

Auto : Detect type of digital input signal and decode and play automatically.

PCM : Decode and play only PCM input signals.

DTS : Decode and play only DTS input signals.

•This item can be set for input sources for which “HDMI” or “Digital” is

assigned at “Input Assign” (vpage98).

•Normally set this mode to “Auto”. Set “PCM” and “DTS” when

inputting the corresponding input signal.

Input Setup

Rename

Change the display name of the selected input source.

Setting items Setting details

Rename

Change the display name of

the selected input source.

•Up to eight characters can be input.

•For character input, see page73.

Default

The input source name

is returned to the default

setting.

Yes : Reset to the defaults.

No : Do not reset to the defaults.

If you select “Default” and press ENTER, the

message “Return settings to the default?”

is displayed. Select “Yes” or “No”, and then

press ENTER.

Source Level (Audio) Default settings are underlined.

•This function corrects the playback level of the selected input source’s audio input.

•Make this setting if there are differences in the input volume levels between the different sources.

Setting details

–12dB – +12dB (0dB)

The analog input level and digital input level can be adjusted independently for input sources for

which “HDMI” or “Digital” is assigned at “Input Assign” (vpage98).

Basic version

Advanced version

Information

Advanced version

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 133 134

Comments to this Manuals

No comments

Denon AVR-1912 Owner's Manual Page 103

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-1912