Denon DN-S3500 User Manual download pdf (Page 10)

ENGLISH

#1 PITCH BEND – button

#2 PITCH BEND + button

• Pushing these buttons will change main playing

speed temporarily.

•While pushing PITCH BEND + button, the

playing speed increases and speed decreases

while pushing PITCH BEND – button.

• When these buttons are release, the playing

speed returns to the previous speed.

#3 Pitch Slider

• Use this slider to adjust playing speed faster or

slower.

#4 PITCH, RANGE button

• Push this button to set the PITCH mode on and

off.

• RANGE:

Push this button for more than 1 sec to select

the pitch range. The pitch range can be selected

with the PARAMETERS knob from ±4, 10, 16,

24, 50 or 100%.

#5 KEY ADJUST button

• Push this button to set the KEY ADJUST mode

on and off.

#6 PLATTER SOURCE button

Select the source for Scratch playback and the

manual search/bend mode.

• MAIN:

This button lights up orange.

Manipulate the Main Track sound.

• SAMP.:

This button lights up green only if a sample is

loaded.

Manipulate the Sampler sound via the scratch

disc.

• BEND/SEARCH:

When this button is pushed again, the

BEND/SEARCH mode is selected.

When the Scratch Disc selector is set to

BEND/SEARCH during playback, it works as the

pitch bend function by turning the scratch disc.

When Scratch Disc is turned in the pause or

standby mode, it functions as the manual

search function. In Manual search, you can

move the CUE point around by one frame at a

time (1/75 second) with an audible frame-repeat

sound, da-da-da-da.

@5 CONT./SINGLE, RELAY button

• CONT./SINGLE:

A short tap of this button will toggle between 3

possible END modes for playback.

CONT. (continue: plays all tracks) SINGLE (stops

playing and ReCUE’s back to your original set

point), PLAYLOCK-see below.

• SINGLE PLAY LOCK:

SINGLE PLAY LOCK can be selected by

PRESET. When SINGLE PLAY LOCK is selected,

track selection during playback is disabled. This

prevents playback from stopping when the

Track Select Knob is turned accidentally during

playback. Play ending mode is the same as

single.

• RELAY:

You can turn on and off RELAY PLAY mode.

Relay playback is possible when two DN-

S3500s are connected by the MEMO in/out

jacks.

@6 FILE SEARCH MODE button

• MP3 DISC only:

When pushing this knob the file search

selection mode can be selected with the

PARAMETERS knob.

@7 TRACK/PARAMETERS knob

• TRACK:

When PARAMETERS LED is on, turn this knob

to select tracks.

By pushing this knob down while turning, the

tracks will change by 10 tracks at a time.

• PARAMETERS:

When the PARAMETER LED is flashing, turn

this knob to select and change the parameter

for items found in the Platter effects, Memo,

and Preset data, etc.

@8 NEXT TRACK button

•

If this button is pushed during playback, the NEXT

TRACK mode will be selected. The next track can

be selected with the PARAMETERS knob.

@9 FAST SEARCH (6)

QUICK JUMP button

#0 FAST SEARCH (7)

QUICK JUMP button

• QUICK JUMP:

When one of these buttons is tapped shortly,

the playback position jumps approximately 10

seconds in the forward (

7) or reverse (6)

direction. The jump time can be changed in the

preset mode.

• FAST SEARCH:

When one of these buttons is pressed and held

in, the disc is fast-searched in the forward (

or reverse (

6) direction.

#7 SCRATCH direction select lever

Select the Scratch play direction.

• BOTH:

When the Scratch Disc is turned, the Scratch

sound is heard in both stroke directions.

• FWD:

When the Scratch Disc is turned, the Scratch

sound is heard in the forward direction only.

#8 BRAKE button

• Push this button to set the BRAKE.

#9 DUMP button

• Push this button to set the DUMP.

$0 REVERSE button

• Push this button to set the REVERSE.

$1 TAP, LOCK, AUTO, INPUT BPM

button

• TAP:

When you push this button repeatedly, the Auto

mode turns off and starts measuring your Beats

Per Minute (BPM) by tapping.

• LOCK:

When this button is pressed once while the

auto BPM counter is operating, the data

measured by the auto BPM counter is locked.

• AUTO:

When pushing the TAP button for 1 second,

activates AUTO BPM mode.

The measured BPM is displayed in the character

section of the display.

• INPUT BPM:

When the TAP button is pressed and held in for

more than 2 seconds, the BPM input mode is

set and the BPM value can be input directly with

the EFFECTS knob. When the tap button is

pressed again, the BPM input mode is turned

off and set.

NOTE:

If you select a new track, AUTO BPM mode

turns on automatically.

$2 ECHO/LOOP button

• The ECHO and ECHO LOOP functions can be

selected. The feedback time and feedback ratio

can be selected. Looping for the feedback time

(ECHO LOOP) is possible by setting the

feedback number to “MAX”.

$3 FLANGER button

• The feedback time and feedback gain can be

selected.

$4 FILTER button

• One of three filters (LOW PASS, MID PASS and

HIGH PASS) can be selected.

$5 EFFECTS knob

• Use this knob to set parameters of the internal

effector.

$6 PLATTER LED

• This vibrant blue bar provides platter modes at a

glance such as, Scratch Memory, Pitch Bend,

Frame Search and Loaded Disc.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Comments to this Manuals

No comments

Denon DN-S3500 User Manual Page 10

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-S3500