Denon AVR-1683 Operations Instructions download pdf (Page 11)

NOTES:

-- Assignment of low frequency signal range --

• The only signals produced from the subwoofer channel are LFE signals (during playback of Dolby Digital or

DTS signals) and the low frequency signal lunge of channels set to "SMALL" in the setup menu The low

frequency signal range of channels set to "LARGE" are produced from those channels

-- Crossover Frequency --

• When "Subwoofer" is set to "Yes" at the "Speaker Configuration Setting", set the frequency (Hz) below

which the bass sound of the various speakers is to be output from the subwoofer (the crossover frequency)

• For speakers aet to "Small", sound with a frequency below the crossover frequency is cut, and the cut bass

sound is output from the subwoofer instead

NOTE: For ordinary speaker systems, we recommend setting the crossover frequency to 80 Hz When

using small speakers, however, setting the crossover frequency to high frequency may improve

frequency response for frequencies near the crossover frequency

-- Subwoofer mode --

• The subwoofer mode setting is only valid when "LARGE" isset for the front speakers and "YES" is set for

the subwoofer in the "Speaker Configuration" settings {see page I0)

If "SMALL" is set for the front speakers or "NO" is set for the subwoofer, the subwoofer mode setting does

not affect playback of low frequency signal range

• When the "+MAIN" playback mode is selected, the low frequency signal range of channels set to "LARGE"

are produced simultaneously from those channels and the subwoofer channel

In this playback mode, the low frequency _ange expand more uniformly through the _oom, but depending on

the size and shape of the room, interference may result in a decrease of the actual volume of the low frequency

range

• When the "NORM" playback mode is selected, the low frequency signal range of channels set to "LARGE"

are only produced flora those channels In this playback mode there tends to be little interference of the low

frequency range in the room

• Try playing the music or movie source and select the playback mode providing the stronger low frequency

range sound

Input the distances from the listening position to the speakers and set the surround

delay time

Preparations:

Measure the distances from the listening position to the speakers (L_ to L3 on the

diagram at the right)

L_: Distance flora center speaker to listening position

L2: Distance flora front speakers to listening position

L3: Distance born surround speakers to listening position

FL Cel/ter FR

Listening

/13osition

SL SR

CAUTION:

Set the center speaker at the same distance from the front speakers {left and right) or the subwoofer, or so

that the difference in distance (L2 - LI) is t 5 meters or less

Set the surround speakers {left and right) at the same distance from the front speakers {left and right) or the

subwoofer, or so that the difference in distance (L2 - L3) is 45 meters or less

Use the _ (left) and J_ {right) buttons to set the distance from the front

speakers and subwoofer to the listening position

• The number changes in units of 01 meter each time one of the buttons is

pressed Select the value closest to the measured distance

{"/SW" appears only when subwoofer = yes)

Press the ENTER or _ {down) button to switch to the center speaker setting

NOTE:

• The speaker distance can be adiusted between 0 and 18 meters in steps of 01 meter

Use the _ (left) and _,_ {right) buttons to set the distance from the center

speaker to the listening position

• The number changes in units of 01 meter each time one of the buttons is

pressed Select the value closest to the measured distance

Press the ENTER or _ {down) button to switch to the surround speakers

setting

NOTE:

• NO setting when "None" has been selected for the center speaker

Use the (_ {left) and _) {right) buttons to set the distance from the surround

speakers to the listening position

• The number changes in units of 01 meter each time one of the buttons is

pressed Select the value closest to the measured distance

Press the ENTER or _ {down) button to enter the setting and switch the

DIGITAL input {COAX) setting

NOTE:

• NO setting when "None" has been selected for the surround speakers

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 194 195

Comments to this Manuals

No comments

Denon AVR-1683 Operations Instructions Page 11

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-1683