16
ENGLISH
1-2 Setting the Manual EQ Setup
Adjust the tone of the various speakers except subwoofer speaker while listening to the sound (music).
1
Select “Manual EQ Setup” at the Auto Setup
/ Room EQ Menu.
Manual EQ Setup
*AutoSet/RoomEQ
(Main unit)(Remote control
unit)
2
Display the Manual EQ Setup screen.
(Main unit)(Remote control
unit)
Channel : FL
*ManualEQ Setup
3
Select the speaker to be set.
The display changes as follows.
SB
FL
FR C
SLA
SLBSRB
SBL
SBR
1spkr
SRA
(Main unit)(Remote control
unit)
Flashing
When the surround back speaker setting
is set to “1spkr” at “Speaker
Configuration”, this is set to “SB”.
Channel : FL
*ManualEQ Setup
4
Select the frequency.
63Hz : 0.0dB
*ManualEQ Setup
(Main unit)(Remote control
unit)
5
Use the cursor left and right buttons to adjust the Gain level.
• Each frequency can be adjusted the range from –6 dB to +6 dB in 0.5 dB
step.
(Main unit)(Remote control
unit)
6
Enter the setting.
The Auto Setup / Room EQ Menu reappears.
(Main unit)(Remote control
unit)
1-3 Setting the Room EQ Setup
Select the setting of an Equalizer that has been set with Auto Setup or Manual EQ.
1
Select “Room EQ Setup” at the Auto Setup /
Room EQ Menu.
Room EQ Setup
*AutoSet/RoomEQ
(Main unit)(Remote control
unit)
2
Display the Room EQ Setup screen.
(Main unit)(Remote control
unit)
SurMode:ALL
*Room EQ Setup
3
Select All or Assign.
• All : The Equalizer to all Surround mode is set as once.
• Assign : The Equalizer to each surround mode is to set individually.
(Main unit)(Remote control
unit)
4
When the All is selected and press the ENTER
button, display the Select the EQ Curve
screen.
Select the Equalizer setting.
• OFF : The Equalizer is not used.
• Normal : Adjusts the frequency
response of all speakers
suitable for general surround
system.
• Flat : Adjusts the frequency
response of all speakers flat.
This is suitable for music
reproduction like ITU-R
speaker setting.
(Main unit)(Remote control
unit)
(Main unit)(Remote control
unit)
OFF Normal
Manual Flat
Front
RoomEQ Normal
*Room EQ Setup
• Front : Adjusts the characteristics of each speaker to the
characteristics of the front speakers.
• Manual : Selects the setting value that was set in the Manual EQ
setup.
Whenever the Room EQ button on Main unit or Remote control unit is
pressed, the display switches as shown below.
Comments to this Manuals