Denon AVR-3805 Operations Instructions Page 63
- Page / 64
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
63
ENGLISH
18
SPECIFICATIONS
2 Audio section
• Power amplifier
Rated output: Front: 120 W + 120 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
Center: 120 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
160 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
Surround: 120 W + 120 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
Surround back: 120 W + 120 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
Dynamic power: 140 W x 2 ch (8 Ω/ohms)
210 W x 2 ch (4 Ω/ohms)
240 W x 2 ch (2 Ω/ohms)
Output terminals: Front, Center, Surr. Back/Multi Zone 6 ~ 16 Ω/ohms
Surround: A or B 6 ~ 16 Ω/ohms
A + B 8 ~ 16 Ω/ohms
• Analog
Input sensitivity / input impedance: 200 mV / 47 kΩ/kohms
Frequency response: 10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode)
S/N: 102 dB (DIRECT mode)
Distortion: 0.005% (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output: 1.2 V
• Digital
D/A output: Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008% (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 96 dB
Digital input: Format — Digital audio interface
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
Signal-to-noise ratio: 74 dB (A weighting, with 5 mV input)
Rated output / Maximum output: 150 mV / 8 V
Distortion factor: 0.03% (1 kHz, 3 V)
2 Video section
• Standard video jacks
Input / output level and impedance: 1 Vp-p, 75 Ω/ohms
Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB
• S-video jacks
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
C (color) signal — 0.286 Vp-p, 75 Ω/ohms
Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB
• Color component video terminal
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
PB/CB signal — 0.7 Vp-p, 75 Ω/ohms
PR/CR signal — 0.7Vp-p, 75 Ω/ohms
Frequency response: DC ~ 100 MHz — +0, –3 dB
2 Tuner section
[FM] (note: µV at 75 Ω/ohms, 0 dBf=1 x 10
–15
W) [AM]
Receiving Range: 87.50 MHz ~ 108.0 MHz 522 kHz ~ 1611 kHz
Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
S/N (IHF-A): MONO 77 dB
STEREO 72 dB
Total Harmonic Distortion (at 1 kHz): MONO 0.15%
STEREO 0.3%
2 General
Power supply: AC 230 V, 50 Hz
Power consumption: 390 W
1 W Max (Standby)
Maximum external dimensions: 434 (W) x 171 (H) x 429 (D) mm
Mass: 17 kg
2 Remote control unit (RC-970)
Batteries: R03/AAA Type (four batteries)
External dimensions: 72 (W) x 238 (H) x 25.5 (D) mm
Mass: 225 g (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
- AVR-3805 1
- RISK OF ELECTRIC SHOCK 2
- DO NOT OPEN 2
- BEFORE USING 3
- CAUTIONS ON INSTALLATION 3
- CAUTIONS ON HANDLING 3
- FEATURES 4
- CONNECTIONS 5
- (Component - Y, P 6
- /CR, PB/CB) Video jacks 6
- The Video Conversion Function 6
- DENON LINK connections 8
- Speaker system connections 9
- Protector circuit 9
- Note on speaker impedance 9
- Front Panel 10
- PART NAMES AND FUNCTIONS 10
- Remote control unit 11
- SETTING UP THE SYSTEM 11
- Before setting up the system 13
- Auto setup/Room EQ 13
- 1-1 Setting the Auto Setup 14
- About automatic retry 14
- About the error message 15
- 1-3 Setting the Room EQ Setup 16
- OFF Normal 16
- Manual Flat 16
- 1-4 Setting the Direct Mode 17
- 1-6 Check the EQ parameter 17
- Setting the Speaker Setup 18
- 2-2 Setting the Delay Time 19
- 2-3 Setting the Channel Level 20
- Setting the Input Setup 22
- 3-5 Auto Tuner Presets 24
- Setting the Advanced Playback 25
- 4-1 Setting the Audio Delay 25
- Setting the Option Setup 26
- 5-5 Setting the Muting Level 28
- 5-7 Protecting the setting 29
- After completing system setup 29
- REMOTE CONTROL UNIT 30
- Preset memory 31
- Learning function 33
- System call 33
- Punch Through 34
- Setting the brightness 34
- Resetting 35
- OPERATION 36
- MASTER VOLUME 37
- BASS TREBLE 38
- After starting playback 38
- SURROUND A SURROUND B 39
- SURROUND A+B 39
- MULTI ZONE 40
- SURROUND 41
- (RECOUT) 41
- Fader function 42
- DTS NEO:6 mode 43
- DOLBY PLIIx DTS NEO:6 43
- 5, 612 34 44
- (Remote control unit) 45
- Adjusting the Audio Delay 46
- DSP SURROUND SIMULATION 47
- DSP surround simulation 47
- Tone control setting 48
- LISTENING TO THE RADIO 50
- Auto tuning 50
- Manual tuning 50
- Checking the preset stations 51
- Recalling preset stations 51
- RDS (Radio Data System) 52
- RDS search 52
- PTY search 53
- TP search 53
- LAST FUNCTION MEMORY 54
- RT (Radio Text) 54
- TROUBLESHOOTING 54
- ADDITIONAL INFORMATION 55
- Speaker setting examples 56
- Surround 57
- DTS Digital Surround 58
- DTS-ES Extended Surround 58
- Surround modes and parameters 61
- II / II x ONLY 62
- SPECIFICATIONS 63
- Telephone: (03) 3837-5321 64
Related products and manuals for AV receivers Denon AVR-3805
(65 pages)
AV receivers Denon AVR-390 Owner's Manual
(39 pages)
(39 pages)
AV receivers Denon AVR-S500BT Owner's Manual
(140 pages)
(140 pages)
(74 pages)© 2020, manymanuals.com. All rights reserved. | 1.278 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals