Denon AVR-X3000 Owner's Manual download pdf (Page 150)

150

Appendix

TipsPlaybackConnections

Contents

Front panel Display Rear panel IndexRemote

Settings

Speakers

The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called

“Audyssey® Setup”.

You do not have to perform Audyssey® Setup when you have already performed Speaker Calibration in Setup Assistant.

To set up the speakers manually, use “Manual Setup” (vpage159) on the menu.

Audyssey

Setup

To perform measurement, place the Setup and measurement microphone

in multiple locations all around the listening area. For best results, we

recommend you measure in six or more positions, as shown in the

illustration (up to eight positions).

•When performing Audyssey® Setup, Audyssey MultEQ® XT/Audyssey Dynamic

EQ®/Audyssey Dynamic Volume® functions become active (vpage136, 137).

NOTE

•Make the room as quiet as possible. Background noise can disrupt the room

measurements. Close windows and turn o the power on electronic devices

(TVs, radios, air conditioners, ﬂuorescent lights, etc.). The measurements could be

aected by the sounds emitted by such devices.

•During the measurement process, place cell phones outside the listening room.

Cell phone signals could disrupt the measurements.

•Do not stand between the speakers and Setup and measurement microphone or

allow obstacles in the path while the measurements are being made. Do not hold

the Setup and measurement microphone in your hand during measurements. This

will cause inaccurate readings.

•During the measurement process, audible test tones will come from the speakers

and subwoofer(s), but this is part of normal operation. If there is background noise

in the room, these test signals will increase in volume.

•Operating VOLUME

df on the remote control unit or MASTER VOLUME on the

main unit during the measurements will cancel the measurements.

•Measurement cannot be performed when headphones are connected. Unplug the

headphones before performing Audyssey® Setup.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 231 232

Comments to this Manuals

No comments

Denon AVR-X3000 Owner's Manual Page 150

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-X3000