Denon DBP 4010UDCI User Manual download pdf (Page 36)

ENGLISH



TroubleshootingInformationHDMI Control FunctionPlaybackConnectionsGetting Started Specications

Setting items

Setting

contents

Default

DNR

Reduce noise in the entire

picture.

0 ~ +3 0

Contrast

Adjust picture contrast.

–6 ~ +6

Brightness

Adjust picture brightness.

0 ~ +12 0

Enhancer

Strengthens the contours of

the picture.

0 ~ +11 0

Gamma Correction

Adjust video brightness in

detail.

G0 ~ 9

G0 = 24 / G1 = 32

G2 = 48 / G3 = 64

G4 = 80 / G5 = 96

G6 = 128 / G7 = 160

G8 = 192 / G9 = 224

Sharpness (medium range)

1, 3

Adjust picture sharpness

for the medium frequency

range.

–6 ~ +6

Sharpness (high range)

Adjust picture sharpness for

the higher frequency range.

–6 ~ +6 0

Hue (color tone)

Adjust the green and red

color balance.

–6 ~ +6 0

White Level

Adjust the white level.

–5 ~ +5 0

Black Level

Adjust the black level.

–5 ~ +5 0

Chroma Level

Adjust the color density.

–6 ~ +6 0

Setup Level

Adjust the black areas of the

image.

0 IRE

7.5 IRE

H.Position

Adjust the left/right position.

–7 ~ +7 0

V.Position

Adjust the top/bottom

position.

–7 ~ +7 0

You can adjust the picture quality to your liking.

You can store up to a maximum of 5 values in memory.

When Finishing Picture Adjustment

Press during picture adjustment.

When Outputting Standard Picture Quality without

Using Picture Adjustment

Press and to select “Standard” and then press .

About Gamma Correction

When you select “Gamma Correction”, and then press , you can

change the setting with .

In the example of the graph below, the horizontal axis shows the

brightness level of the pictured recorded on the disc. The vertical axis

shows the brightness of the picture output by the DBP-4010UDCI.

PICT

Gamma CorrectionMemory 5

255

G0:024

On adjusting the brightness on the output side of bright parts on

the disc side, the normally hard to see bright parts become clearly

discernible images.

PICT

Gamma CorrectionMemory 5

255

G0:024

On adjusting the brightness on the output side of dark parts on

the disc side, the normally hard to see dark parts become clearly

discernible images.

Resuming Initial Values after Gamma

Correction

Press while a graph is displayed.

•

The picture adjustment set values are retained in memory even after

the power is turned off.

Adjusting the Picture Quality (Picture Control)

Press .

The currently set status is displayed.

Select the memory number you want (“Memory 1” ~

“Memory 5”) with , and then press .

Standard

Memory 1

Memory 5

PICT

Select the item you want to change

with .

Memory 1

DNR

Contrast

V.Position

Change the setting with .

Refer to the table on the right regarding contents of items which

can be set.

Setup

z1：This is not available for HDMI output.

z2： Effective only for the 480i video signal from the video output terminal, S

video output terminal, and component video output terminal.

z3： This has no effect with the video and S-Video outputs.

z4： This has no effect with the video and S-Video outputs when playing PAL

video.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 68 69

Comments to this Manuals

No comments

Denon DBP 4010UDCI User Manual Page 36

Comments to this Manuals

Related products and manuals for Blu-Ray players Denon DBP 4010UDCI