Denon DN-X1600 User Manual download pdf (Page 11)

Getting Started Connections Basic Operations Speciﬁ cations Troubleshooting

Effector Function Fader Start UtilityUSB

Connections

ENGLISH

Connections

When making connections, also refer to the

instruction manuals of each device.

1. Make certain AC power is off while making

connections.

2. Quality cables make a big difference in ﬁ delity

and punch. Use high-quality, audio cables.

Do not use excessively long cables.

3. Be sure plugs and terminals are securely

fastened. Loose connections cause hum,

noise, or intermittence that could damage your

speakers.

4. Make sure that all faders are at “zero”, and that

the power supply to each unit is off.

5. Connect the cables to the input and output

terminals.

6. Connect the power ampliﬁ er to the output.

NOTE

• Always switch on your audio input sources such

as CD players ﬁ rst, then your mixer, and ﬁ nally

any ampliﬁ ers.

• When turning off, always reverse this operation

by turning off ampliﬁ ers, then your mixer, and

then input units.

Preparations

Cables Used for Connections

Select the cables according to the equipment being

connected.

Audio cables

For RCA PINJACK

RCA pin plug

For SEND/RETURN

Unbalanced Unbalanced

For MIC

Balanced Balanced

1/4” TRS XLR3-11C Type

For BALANCED MASTER OUT

Balanced Balanced

1/4” TS 1/4” TS

1=GND

2=Hot

3=Cold

Ring=Cold

Tip=Hot

2=Hot 1=GND

3=Cold

Sleeve= GND

Ring=Cold

Tip=Hot

1/4” TRS

XLR3-11C Type

3 PHONO inputs/5 CD inputs terminals

These unbalanced stereo RCA terminals are used

to connect devices such as a turntable (RIAA) with

an MM (moving magnet) type of cartridge or CD/

Media Player.

LINE 1, 2, 3, 4 FADER output terminals

Connect these terminals to the Fader input

terminals of the DN-S1200, DN-S3700 and etc

using the 3.5 mm stereo mini cord.

MIC1 input terminal

A microphone is connected to this balanced combo

jack with XLR connector.

• Pin layout:

1. GND

2. Hot

3. Cold

• Applicable connector:

Cannon XLR-3-32 or equivalent.

MIC2 input terminal

Accepts a balanced microphone with 1/4” terminals.

• Pin layout (TRS):

Tip: Hot

Ring: Cold

Sleeve: GND

Input Terminal Connection

Balanced

Microphones

DN-S3700 DN-S3700

Turntable

Mic

XLR

Turntable

Sleeve= GND

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Comments to this Manuals

No comments

Denon DN-X1600 User Manual Page 11

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-X1600