Denon DN-X1600 User Manual download pdf (Page 16)

Getting Started Connections Basic Operations Speciﬁ cations TroubleshootingEffector Function Fader Start UtilityUSBEffector Function

ENGLISH

Effector Function

The unit comes with an effector which is linked to the number of beats which has been set in synchronization

with the number of beats per minute (BPM) of the musical composition. It also has an effect send

conﬁ guration which makes it possible to send the signals from multiple input channels simultaneously to

the effectors, enabling a wide range of acoustic effects.

Types of effects and details of operations

No. Effect Description of effect operation

1 Delay Adds signals which have been delayed by the time of the beat setting.

2 Echo Adds echo signals which have been delayed by the time of the beat setting.

3 Ping Pong Delay

Signals with a beat setting time delay are split and output from the left and

right channels.

• Effect Parameter Control: Adjusts the ratio of signal being output to the left

and right.

4 Trans Cuts off the signals at the time of the beat setting.

5 Flanger

Adds signals whose delay time has been varied in the LFO period of the beat

setting.

6 Filter Varies the ﬁ lter cut-off frequency using the beat setting time.

7 Phaser

Adds signals whose phase has been varied in the LFO period of the beat

setting.

8 Reverb

Adds reverberation signals which have been delayed by the time of the beat

setting.

9 Echo Reverb

Adds an echo signal to the beat setting time delay, and adds a reverberation

signal.

10 Loop

Initiates the same kind of loop sampler processing as the LOOP function of

other Denon DJ products.

11 Rev. Loop Initiates the reverse play processing of the above loop signals.

12 Pitch Shift Initiates the pitch shift processing of the input signals, and outputs the results.

13 BeatBreaker

Initiates the partial insertion processing of the attack sounds of the beats as

per the beat pattern.

14 BeatScratch

Repeats standard playback of the beat setting time and reverse playback of the

same beat setting time to output a scratching effect.

15 SEND/RTN

Sends the signals whose effects have been selected to the external effector

and returns the signals from the external effector.

* In order to achieve normal effects, set the BPM value that matches the number of beats of the musical

compositions.

BeatBreaker Function

What the BeatBreaker effector does

This effector breaks down the music signals in each bar obtained from the BPM value a quarter beat at

a time into 16 sections, replaces these sections with a preset beat pattern, and then plays them back to

achieve an effect where the beat of the original musical composition is changed.

Details of operation

The beat patterns consist of 16 blocks, and when these blocks are lighted, the sound is being replaced

by the initial sound of the beat.

When this effect is ON, the left block and beat display are used, and the block being played is indicated.

Example:

Pattern

Snare

Kick

Snare

Kick

In the case of pattern

q shown in the figure, when the music signals w are input, the sound of signals

e, which are produced by replacing the sound of the first quarter beat with the lighted section, are

output.

Operation method

Using the

Effect ON/OFF buttons, the effect with the timing when the buttons were set to ON at the

beginning is added.

The beat pattern is selected using the BEAT , buttons.

In the Utility mode, ﬁ ve user presets can be created.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Comments to this Manuals

No comments

Denon DN-X1600 User Manual Page 16

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-X1600