Denon AVR-1683 Operations Instructions download pdf (Page 20)

4 _ Set the surround parameter according to the source

First, press the SURROUND PARAMETER button

NOTE: Please make sure the "AUDIO" position of the sWe switch on the remote

{Remoteco_ltrolunt) control unit

{Remote control un_tl

Use the _ (left) and _ {right) buttons to set the CINEMA EQ

(Initiall

i::::[H,::'_q,IRE:_:':!i:::iF:F _

{left) button (right) button

Press the SURROUND PARAMETER or _ {down) button to switch to the D

COMP setting

{Remote control un_tl

Use the _ (left) and _ {right) buttons to set the D COMP

(Initial)

(left) button (right) button

Press the SURROUND PARAMETER or _ {down) button to switch to the

LFE setting

NOTE: This parameter is not displayed during DTS playback

{Remote control un_tl

Use the _ (left) and _ {right) buttons to set the LEE level

• The level can be adjusted in units of I dB from -10 to O dB

Set to the desired level according to the speaker systems being used and the

source to be played

Press the SURROUND PARAMETER or _ {down) button to switch to the

default setting

{Remote control un_tl

To reset the settings to the factory defaults, use the _ (left) and _ (right) to

display "Yes"

(left) button (right) button

Press the SURROUND PARAMETER or _ {down) button to switch to the

CINEMA EQ setting

{Remote control un_tl

Press the ENTER button to finish surround parameter mode

Surround parameters _2_

CINEMA EQ. (Cinema Equalizer):

The Cinema EQ function gently decreases the leve) of the extreme high frequencies, compensating for

ovedy-bright sounding motion picture soundt(acks Select this function if the sound from the front spea(<ers

is too bright

This function only works in the Dolby Pro Logic, Dolby Digital and DTS Surround modes

D.COMP. (Dynamic Range Compression):

Motion picture soundtracks have tremendous dynamic range (the contrast between very soft and very loud

sounds) For listening late at night, or whenever the maximum sound level is lower than usual, the Dynamic

Range Compression allows you to hear all of the sounds in the soundf(ack (but with reduced dynamic (ange)

(This only works when playing program sources recorded in Dolby Digital ) Select one of the four parameters

("OFF", "LOW", "MID" (middle) or "HI" (highl) Set to OFF for normal listening

LFE (Low Frequency Effect):

Program source and adiustmenf range

1 Do(by Digital: -IO dB to O dB

2 DTS Surround: -10 dB to 0 dB

When Dolby Digital encoded software is played, it is recommended that the LFE LEVEL be set to

0 dS for correct Do(by Digital playback.

When DTS encoded _ software is played, it is recommended that the LFE LEVEL be set to

0 dS for correct DTS playback.

When DTS encoded music software is played, it is recommended that the LFE LEVEL be set to

-10 dB for correct DTS playback.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 194 195

Comments to this Manuals

No comments

Denon AVR-1683 Operations Instructions Page 20

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-1683