21
ENGLISH
When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel
level adjustments made will affect all surround modes. Consider this mode a Master Channel Level
adjustment mode.
After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then activate the
individual surround modes and adjust channel levels that will be remembered for each of those modes.
Then, whenever you activate a particular surround sound mode, your preferred channel level adjustments
for just that mode will be recalled. Check the instructions for adjusting channel levels within each
surround mode. (See page 41)
You can adjust the channel levels for each of the following surround modes: PURE DIRECT/DIRECT,
STEREO, DOLBY/DTS SURROUND, 5/7 CH STEREO, WIDE SCREEN, SUPER STADIUM, ROCK ARENA,
JAZZ CLUB, CLASSIC CONCERT, MONO MOVIE, VIDEO GAME, MATRIX and VIRTUAL.
When using either surround speakers A or B, or when using surround speakers A and B at the same time,
be sure to adjust the balance of playback levels between each channel for the various selections of “A
or B” and “A and B”.
2-4 Setting the crossover frequency
• Set the crossover frequency mode according to the speaker system being used.
1
Select the “Crossover Frequency” at the
Speaker Setup Menu.
Crossover Freq.
*Speaker Setup
(Main unit)(Remote control
unit)
2
Display the Crossover Frequency screen.
(Main unit)(Remote control
unit)
3
Select the frequency.
(Main unit)(Remote control
unit)
• 40 / 60 / 80 / 100 / 120 / 150 / 200 / 250 Hz
can be selected.
4
Enter the setting.
The Speaker Setup Menu reappears.
(Main unit)(Remote control
unit)
2-5 Setting the low frequency distribution
This screen is not displayed when not using a subwoofer and all speakers are set to small size.
• Set the subwoofer mode according to the speaker system being used.
1
Select the “Subwoofer Mode Setup” at the
Speaker Setup Menu.
Subwoofer Mode
*Speaker Setup
(Main unit)(Remote control
unit)
2
Display the Subwoofer Mode screen.
(Main unit)(Remote control
unit)
3
Select the setting.
(Main unit)(Remote control
unit)
4
Enter the setting.
The Speaker Setup Menu reappears.
(Main unit)(Remote control
unit)
Comments to this Manuals