23
ENGLISH
3-1 Setting the Digital In Assignment
• This setting assigns the digital input jacks of the AVR-3805 for the different input sources.
1
At the Input Setup Menu select “Digital In
Assign”.
(Main unit)(Remote control
unit)
2
Display the Digital Inputs screen.
(Main unit)(Remote control
unit)
3
Select the digital input jack to be assigned to the input source.
q Select the input source
(Main unit)(Remote control
unit)
w Select the digital input jack
Select “OFF” for input sources for which no digital input jacks are used.
If “Yes” is selected for “Default”, the settings are automatically
reset to the default values.
(Main unit)(Remote control
unit)
4
Enter the setting.
The Input Setup Menu reappears.
(Main unit)(Remote control
unit)
NOTES:
• The OPTICAL 3, 4 jacks on the AVR-3805’s rear panel are equipped with an optical digital output jack for
recording digital signals on a CD recorder, MD recorder or other digital recorder. Use this for digital recording
between a digital audio source (stereo - 2 channel) and a digital audio recorder.
• Do not connect the output of the component connected to the OPTICAL 3, 4 OUT jack on the AVR-3805’s
rear panel to any jack other than the OPTICAL 3, 4 IN jack.
•“PHONO” and “TUNER” cannot be selected on the Digital In Assignment.
Refer to “DENON LINK connections”. (See page 8)
3-2 Setting the Ext. In Subwoofer Level
• Set the method of playback of the analog input signal connected to the Ext.In Subwoofer.
1
Select “Ext.In Subwoofer Level” at the Input
Setup Menu.
Ext.In SW Lev.
*Input Setup
(Main unit)(Remote control
unit)
2
Display to the Ext.In Subwoofer Level screen.
(Main unit)(Remote control
unit)
SW Lev.: +15dB
*Ext.In SW Lev.
3
Select the desired setting.
Select according to the specifications of the player being used. Also refer to
the player’s operating instructions.
+15 dB (default) recommended. (0, +5, +10 or +15 can be selected.)
(Main unit)(Remote control
unit)
4
Enter the setting.
The Input Setup Menu reappears.
(Main unit)(Remote control
unit)
3-3 Setting the Component In Assign
• This setting assigns the color difference (component) video input jacks of the AVR-3805 for the different input
sources.
1
Select “Component In Assign” at the Input
Setup Menu.
Component In
*Input Setup
(Main unit)(Remote control
unit)
2
Display the Component In Assign screen.
(Main unit)(Remote control
unit)
Comments to this Manuals