Denon AVR-5800 Operations Instructions download pdf (Page 12)

Speaker system connections

• Connect the speaker terminals with the speakers making sure that like

polarities are matched ( < with < , > with > ). Mismatching of polarities will

result in weak central sound, unclear orientation of the various instruments,

and the sense of direction of the stereo being impaired.

• When making connections, take care that none of the individual conductors

of the speaker cord come in contact with adjacent terminals, with other

speaker cord conductors, or with the rear panel.

Speaker Impedance

• Speakers with an impedance of from 6 to 16 Ω/ohms can be connected for

use as front and center speakers.

• Speakers with an impedance of 6 to 16 Ω/ohms can be connected for use

as surround speakers.

• The protector circuit may be activated if the set is played for long periods of

time at high volumes when speakers with an impedance lower than the

specified impedance are connected.

NOTE:

NEVER touch the speaker terminals when the power is on.

Doing so could result in electric shocks.

Connecting the speaker cords

1. Loosen by turning

counterclockwise.

2. Insert the cord. 3. Tighten by turning

clockwise.

Either tightly twist or terminate the core wires.

Connecting banana plugs

Turn clockwise to tighten, then insert the

banana plug.

Protector circuit

• This unit is equipped with a high-speed protection circuit. The purpose of this circuit is to protect the speakers under

circumstances such as when the output of the power amplifier is inadvertently short-circuited and a large current flows,

when the temperature surrounding the unit becomes unusually high, or when the unit is used at high output over a long

period which results in an extreme temperature rise.

When the protection circuit is activated, the speaker output is cut off and the power supply indicator LED flashes. Should

this occur, please follow these steps: be sure to switch off the power of this unit, check whether there are any faults

with the wiring of the speaker cables or input cables, and wait for the unit to cool down if it is very hot. Improve the

ventilation condition around the unit and switch the power back on.

If the protection circuit is activated again even though there are no problems with the wiring or the ventilation around the

unit, switch off the power and contact a DENON service center.

Note on speaker impedance

• The protector circuit may be activated if the set is played for long periods of time at high volumes when speakers with

an impedance lower than the specified impedance (for example speakers with an impedance of lower than 4 Ω/ohms)

are connected. If the protector circuit is activated, the speaker output is cut off. Turn off the set’s power, wait for the set

to cool down, improve the ventilation around the set, then turn the power back on.

Cooling fan

• The AVR-5800 is equipped with a cooling fan to prevent the temperature inside the set from rising. The fan is activated

under certain usage conditions. It is temperature and volume level sensitive, to minimize or prevent audible fan noise.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 111 112

Comments to this Manuals

No comments

Denon AVR-5800 Operations Instructions Page 12

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-5800