Denon AVR-5800 Operations Instructions download pdf (Page 33)

Playing the input source

3 5

Select the input source to be played.

INPUT SELECTOR

(Main unit) (Remote control unit)

Example: CD

When the input source is selected,

the input indicator lights.

Lit

Select the input mode.

• Selecting the analog mode

Press the ANALOG button to switch to the analog input.

ANALOG

(Main unit) (Remote control unit)

• Selecting the external input (EXT. IN) mode

Press the EXT. IN (on the EXT. IN button on the remote

control unit) to switch the external input.

EXT. IN

(Main unit) (Remote control unit)

• Selecting the AUTO, PCM and DTS modes

The mode switches as shown below each time the INPUT

MODE button is pressed.

INPUT

MODE

(Main unit) (Remote control unit)

AUTO PCM

(RF)

DTS

1 3 2

Input mode selection function

Different input modes can be selected for the different input sources.

The selected input modes for the separate input sources are stored

in the memory.

q AUTO (All auto mode)

In this mode, the types of signals being input to the digital and

analog input jacks for the selected input source are detected and

the program in the AVR-5800’s surround decoder is selected

automatically upon playback. This mode can be selected for all

input sources other than PHONO and TUNER.

The presence or absence of digital signals is detected, the signals

input to the digital input jacks are identified and decoding and

playback are performed automatically in DTS, Dolby Digital or

PCM (2 channel stereo) format. If no digital signal is being input,

the analog input jacks are selected.

Use this mode to play Dolby Digital signals.

w PCM (exclusive PCM signal playback mode)

Decoding and playback are only performed when PCM signals are

being input.

Note that noise may be generated when using this mode to play

signals other than PCM signals.

e DTS (exclusive DTS signal playback mode)

Decoding and playback are only performed when DTS signals are

being input.

r RF (exclusive RF signal playback mode)

This can only be selected when the program source is set to VDP.

Decording and playback are only performed when RF signals are

being input. This is used when the LD player has an Dolby Digital-

RF (AC-3RF) output jack, but does not have a PCM digital output

jack.

t ANALOG (exclusive analog audio signal playback mode)

The signals input to the analog input jacks are decoded and

played.

y EXT. IN (external decoder input jack selection mode)

The signals being input to the external decoder input jacks are

played without passing through the surround circuitry.

NOTE:

• Note that noise will be output when CDs or LDs recorded in DTS

format are played in the “PCM” or “ANALOG” mode. Select the

“DTS” mode when playing signals recorded in DTS from a laser

disc player or CD player.

Note on playing a source encorded with DTS

• Noise may be generated at the beginning of playback and

while searching during DTS playback in the AUTO mode. If

so, play in the DTS mode.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 111 112

Comments to this Manuals

No comments

Denon AVR-5800 Operations Instructions Page 33

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-5800