Denon AVR-5800 Operations Instructions Page 26
- Page / 112
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
26
7
Select “Yes”.
8
a. If the “Auto” mode is selected:
Test tones are automatically emitted from the different speakers.
The test tones are emitted from the different speakers in the
following order, at 4-second intervals the first time and second time
around, 2-second intervals the third time around and on:
Use the CURSOR buttons to adjust all the speakers to the same
volume.
The volume can be adjusted between –12 dB and +12 dB in units of
1 dB.
b. When the “Manual” mode is selected
Move jog stick “ENTER” left and right to select the speaker for which
you want to output test tones, then move jog stick “ENTER” back and
forth to adjust so that the volume of the test tones from the various
speakers is the same.
9
After the above settings are completed, press the ENTER button again.
The “Channel Level” screen reappears.
Example: When the volume is set to –12 dB
while the test tone is being
produced from the subwoofer
Example: When the volume is set to –12 dB
while the subwoofer is selected
To cancel the settings, select “Level Clear” and “Yes” on the “Channel Level” screen, then make the settings again.
The level of each channel should be adjusted to 75 dB (C-weighted, slow meter mode) on a sound level meter at the listening position.
If a sound level meter is not available adjust the channels by ear so the sound levels are the same. Because adjusting the subwoofer level test
tone by ear is difficult, use a well known music selection and adjust for natural balance.
NOTE: When adjusting the level of an active subwoofer system, you may also need to adjust the subwoofer’s own volume control.
When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affect
ALL surround modes. Consider this mode a Master Channel Level adjustment mode.
After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then activate the individual surround modes and
adjust channel levels that will be remembered for each of those modes. Then, whenever you activate a particular surround sound mode,
your preferred channel level adjustments for just that mode will be recalled. Check the instructions for adjusting channel levels within each
surround mode on Page 42.
You can adjust the channel levels for each of the following surround modes: DIRECT, STEREO, 5CH/7CH STEREO, DOLBY/DTS SURROUND,
HOME THX CINEMA, WIDE SCREEN, SUPER STADIUM, ROCK ARENA, JAZZ CLUB, CLASSIC CONCERT, MONO MOVIE, and MATRIX.
When using either surround speakers A or B, or when using surround speakers A and B at the same time, be sure to adjust the balance of
playback levels between each channel for the various selections of “A or B” and “A and B”.
Flashing
Flashing
FL C FR SR SBR SBL SL SW
SB
1spkr
2spkrs
When the surround back speaker setting is set to “1spkr” for
“Speaker Configuration”, this is set to “SB”.
- AVR-5800 1
- ATTENTION 2
- SAFETY INSTRUCTIONS 3
- TABLE OF CONTENTS 4
- BEFORE USING 4
- CAUTIONS ON INSTALLATION 4
- CAUTIONS ON HANDLING 5
- CONNECTIONS 6
- Connecting video components 7
- Connecting a monitor TV 8
- Connecting the video decks 8
- Connecting a TV/DBS tuner 8
- Jacks (DVD Player) 9
- Another room 11
- Protector circuit 12
- Note on speaker impedance 12
- Cooling fan 12
- Connections 13
- PART NAMES AND FUNCTIONS 14
- Remote control unit 15
- SETTING UP THE SYSTEM 16
- Before setting up the system 18
- ON / STANDBY 18
- (Main unit) 18
- Setting the type of speakers 19
- Setting the Subwoofer mode 20
- Setting the delay time 22
- Setting the channel level 25
- FL C FR SR SBR SBL SL SW 26
- Auto tuner presets 29
- After completing system setup 30
- REMOTE CONTROL UNIT 31
- Using the remote control unit 31
- OPERATION 32
- Playing the input source 33
- After starting playback 34
- SURROUND A SURROUND B 35
- SURROUND A+B 35
- 1, 41, 2 2 36
- EXT. IN-2EXT. IN-1 38
- Power amplifier (Option) 40
- INTEGRATED 41
- AMPLIFIER 41
- SURROUND 42
- FUNCTION 43
- THX CINEMA 45
- Dolby Surround Pro Logic mode 47
- DTS Neo:6 mode 47
- DENON ORIGINAL SURROUND MODES 48
- DSP surround simulation 49
- 2, 3, 4, 5 50
- LISTENING TO THE RADIO 52
- Preset memory 53
- Checking the preset stations 53
- LAST FUNCTION MEMORY 54
- ADDITIONAL INFORMATION 56
- Surround back speakers 57
- Speaker setting examples 58
- Surround 60
- DTS Digital Surround 61
- DTS-ES Extended Surround 62
- Home THX Cinema surround mode 63
- THX Surround EX 63
- Surround modes and parameters 65
- Telephone: (03) 3584-8111 67
- TABLE OF CONTENTS 69
- -, Phd-HIT&@ 74
- CHANNEI 76
- -.^ .. 78
- B)ENON ~~ 78
- - *““..“$ 78
- (ISP*CEI[Fj 83
- [-pi 83
- [Sl*IISlDEl[j 83
- Create New 90
- Backup Data? 90
- Cahbralion 90
- RF/IR Select 90
- User Menu 91
- User Backup 91
- ONE-BUTTON SEARCH FUNCTION 98
- RF TRANSMISSION FUNCTION 99
- FACTORY DEFAULT SETTINGS 99
- CAUTIONS ON USE 100
- TROUBLESHOOTING 100
- NIPPON COLUMBIA CO., LTD 101
- RC-8001 ST 102
- FEATURES 103
- BEFORE USING 103
- 3 NAMES OF PARTS 104
- RC-8000 105
- 5 OPERATION 106
- SPECIFICATIONS 107
- NIPPON COLUMBIA Co., LTD 108
- 511 3808000 109
- LIMITED WARRANTY 111
- DENON’ ELECTRONICS 112
Related products and manuals for AV receivers Denon AVR-5800
AV receivers Denon AVR-X1100W Owner's Manual
(259 pages)
(259 pages)
(48 pages)
AV receivers Denon AVR-1312 User Manual
(66 pages)
(66 pages)
© 2020, manymanuals.com. All rights reserved. | 0.129 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals