Denon AVR-5800 Operations Instructions download pdf (Page 47)

Surround parameters w

CINEMA EQ. (Cinema Equalizer):

The Cinema EQ function gently decreases the level of the extreme high frequencies, compensating for overly-bright sounding motion picture

soundtracks. Select this function if the sound from the front speakers is too bright.

This function only works in the Dolby Pro Logic, Dolby Digital, DTS Surround and Wide Screen modes.

D.COMP. (Dynamic Range Compression):

Motion picture soundtracks have tremendous dynamic range (the contrast between very soft and very loud sounds). For listening late at night,

or whenever the maximum sound level is lower than usual, the Dynamic Range Compression allows you to hear all of the sounds in the

soundtrack (but with reduced dynamic range). (This only works when playing program sources recorded in Dolby Digital or DTS.) Select one of

the four parameters (“OFF”, “LOW”, “MID” (middle) or “HI” (high)). Set to OFF for normal listening.

This parameter is displayed only when playing compatible sources in DTS mode.

LFE (Low frequency Effect):

This sets the level of the LFE (Low Frequency Effect) sounds included in the source when playing program sources recorded in Dolby Digital

or DTS.

If the sound produced from the subwoofer sounds distorted due to the LFE signals when playing Dolby Digital or DTS sources when the peak

limiter is turned off with the subwoofer peak limit level setting (system setup menu), adjust the level as necessary.

Program source and adjustment range

1. Dolby Digital:-10 dB to 0 dB

2. DTS Surround:-10 db to 0 dB

When DTS encoded movie software is played, it is recommended that the LFE LEVEL be set to 0 dB for correct DTS playback.

When DTS encoded music software is played, it is recommended that the LFE LEVEL be set to -10 dB for correct DTS playback.

TONE:

This adjusts the tone control. (See “Surround parameters e” on page 50.)

2 Dialogue Normalization

The dialogue normalization function is activated automatically when playing Dolby Digital program sources.

Dialogue normalization is a basic function of Dolby Digital which automatically normalizes the dialog level (standard level) of the signals which are

recorded at different levels for different program sources, such as DVD, DTV and other future formats that will use Dolby Digital.

When this function is activated, the following message appears on the main unit’s display:

The number indicates the normalization level when the currently playing program is normalized to the

standard level.

Dolby Surround Pro Logic mode

Select the Dolby Surround Pro Logic mode.

• The Dolby Pro Logic indicator lights.

DOLBY

SURROUND

Lit

(Main unit)

(Remote control unit)

Play a program source with the mark.

• For operating instructions, refer to the manuals of the

respective components.

NOTE:

• There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3CH. LOGIC). The AVR-5800 sets the mode automatically

according to the types of speakers set during the system setup process (page 19).

DTS Neo:6 mode

Select the DTS surround mode.

• Select CINEMA or MUSIC. (CINEMA is optimum for

movies, MUSIC is optimum for music software.)

(Main unit) (Main unit)

Surround playback can be conducted for the analog input and PCM

digital input 2-channel signals.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 111 112

Comments to this Manuals

No comments

Denon AVR-5800 Operations Instructions Page 47

Comments to this Manuals

Related products and manuals for AV receivers Denon AVR-5800