Denon AVR-5800 Operations Instructions download pdf (Page 25)

Setting the channel level

• Use this setting to adjust so that the playback level between the different channels is equal.

• From the listening position, listen to the test tones produced from the speakers to adjust the level.

• The level can also be adjusted directly from the remote control unit. (For details, see page 42.)

• When using both surround speakers A and B, their playback levels can be adjusted separately.

At the System Setup Menu select “Channel Level”.

Switch to the Channel Level screen.

Select “Test Tone Mode”.

Select the mode.

Select “Auto” or “Manual”.

• Auto:

Adjust the level while listening to the test tones produced automatically

from the different speakers.

• Manual:

Select the speaker from which you want to produce the test tone to

adjust the level.

Example: When the “Auto” mode is selected

Select “Surr. Sp.”, then select the surround speaker(s) from which you want to produce the test

tone (A, B or A+B).

• Surr. Sp.: A

Adjusts the balance of the playback level between the channels when using surround speaker

• Surr. Sp.: B

Adjusts the balance of the playback level between the channels when using surround speaker

• Surr. Sp.: A+B

Adjusts the balance of the playback level between the channels when using surround

speakers A and B at the same time.

The “Surr. Sp.” can only be selected when both surround speakers A and B have been

selected at the “Speaker Configuration” (when both A and B have been set to “Large” or

“Small”).

Select “Test Tone Start”.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 111 112

No comments

Denon AVR-5800 Operations Instructions Page 25