Denon MULTEQXT AVR-4306 Operations Instructions download pdf (Page 35)

Basic Operation Basic Operation

2 DIRECT mode

Use this mode to achieve good quality 2-channel sound. In this

mode, the audio signals bypass such circuits as the tone circuit

and are transmitted directly, resulting in good quality sound.

Playing audio sources (CDs and DVDs)

2-channel playback modes

• The system setup function cannot be used when the PURE

DIRECT mode is set. To use the system setup function, cancel

the PURE DIRECT mode.

• If the HDMI input terminal is selected, video outputs are

outputted in the PURE DIRECT mode.

• The channel level and surround parameters in the PURE

DIRECT mode are the same as in the DIRECT mode.

• The AVR-4306 is equipped with three 2-channel playback

modes exclusively for music.

• Select the mode to suit your tastes.

Press the DIRECT/STEREO button to select the

DIRECT mode.

The mode switches as shown below each time the

DIRECT/STEREO button is pressed.

STEREODIRECT

2 PURE DIRECT mode

This mode reproduces the sound with extremely high quality.

When this mode is set, all circuits and processes not required for

the selected input source (FL tube, video circuit and tone control,

as well as digital circuitry and other unnecessary circuits for

analog audio inputs) are automatically turned off so the music

signals can be reproduced with high sound quality.

Press the PURE DIRECT button to select the PURE

DIRECT mode.

2 STEREO mode

Use this mode to adjust the tone and achieve the desired sound.

Press the DIRECT/STEREO button to select the

STEREO mode.

DIRECT/STEREO

PURE DIRECT

DIRECT/STEREO

PURE DIRECT

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 145 146

No comments

Denon MULTEQXT AVR-4306 Operations Instructions Page 35