Denon MULTEQXT AVR-4306 Operations Instructions download pdf (Page 80)

Advanced Setup – Part 1 Advanced Setup – Part 1

Setting the Auto Surround Mode

The surround mode used at last for the four types of input signals

shown below is stored in the memory, and the signal is

automatically played with that surround mode the next time it is

input.

Note that the surround mode setting is also stored separately for

the different input sources.

q Analog and PCM 2-channel signals (STEREO)

w 2-channel signals of Dolby Digital, DTS or other multi-

channel format (DOLBY PLIIx Cinema)

e Multi-channel signals of Dolby Digital, DTS or other multi-

channel format (DOLBY/DTS SURROUND)

r PCM and DSD multi-channel signals other than Dolby

Digital and DTS (MULTI CH IN)

Default settings are indicated in ( ).

During playback in the PURE DIRECT mode, the surround

mode does not change even if the input signal is changed.

Setting the Manual EQ Setup

Allows you to adjust the tonal quality of the various speakers

(except the subwoofer) while listening to a music source.

Press the CURSOR

button to select

“Manual EQ Setup” at the “Advanced

Playback” menu, then press the ENTER button.

• The “Manual EQ” screen appears.

Press the CURSOR

button to select the

adjustment mode, then press the ENTER button.

All CH:

All channels can be adjusted simultaneously.

L/R CH:

The left and right channels of the pair of speakers can be

adjusted simultaneously.

Each CH:

The channels can be adjusted separately.

Press the CURSOR

button to select “Auto

Surround Mode” at the “Advanced Playback”

menu, then press the ENTER button.

• The “Auto Surround Mode” screen appears.

Press the CURSOR

button to select “ON”

if you want to use the auto surround mode,

“OFF” if you do not want to use it.

Press the ENTER button to enter the setting.

• The “Advanced Playback” menu reappears.

• The various settings applied in

the auto surround mode can be

checked via the on screen

display. Simply press the ON

SCREEN button.

Press the CURSOR

button to select the

speaker to be set.

• The screen switches to the character input screen.

Example: When “L/R CH” is selected.

The display changes as follows.

When the surround back speaker setting is set to “1spkr” at

“Speaker Configuration”, this is set to “SB”.

e Select “All CH”

In this case, speaker selection is not performed.

If a value is already set for the FL channel, the data stored

for the FL channel is displayed.

q Select “L/R CH”

w Select “Each CH”

FL/FR

SBL/SBR

C SLA/SRA

SLB/SRBSL/SR A+B

SBR

1spkr

SLA

SRA SLB

SRBSBL SR A+B SL A+B

Press the CURSOR

button to select the

frequency, then press the CURSOR

button to adjust the gain level.

Each frequency can be adjusted the range from –20 dB to

+6 dB in 0.5 dB step.

Press the ENTER button to enter the setting.

• The “Manual EQ” screen reappears.

Press the CURSOR

button to select

“Exit”, then press the ENTER button.

• The “Advanced Playback” menu reappears.

• “Base Curve Copy” is

displayed after performing the

Auto Setup.

•To restore the settings to their

defaults, select “Default Yes

0”, then press the CURSOR

button.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 145 146

Comments to this Manuals

No comments

Denon MULTEQXT AVR-4306 Operations Instructions Page 80

Comments to this Manuals

Related products and manuals for AV receivers Denon MULTEQXT AVR-4306