Denon DN-X1600 User Manual download pdf (Page 27)

Getting Started Connections Basic Operations Speciﬁ cations Troubleshooting

Effector Function Fader Start UtilityUSB

Utility

ENGLISH

Category Item Parameter Value Default Settings Setting Details

1 Audio Setting

1 Master Setting 1 MONO ON / OFF OFF When set to ON, the Master output is monaural.

2 Mic Setting

1 Ducking Level -20dB to -40dB -30dB Adjusts the amount of attenuation for the audio level when ducking is operating.

2 Ducking Response Fast or Normal Normal Adjusts the ducking response.

3 Mic EQ

1 Hi 1kHz to 4kHz 2kHz

Sets the Mic EQ cut off frequency.

2 Low 500Hz to 2kHz 1kHz

3 Default -

4 Mic to Booth/Rec ON / OFF OFF When set to ON, the Mic sound is output from Booth and Rec.

3 Isolator EQ

1 X.Over Hi 1kHz to 8kHz 2kHz

Sets the boundary lines for the frequencies that control Hi, Mid, and Low in the channel

equalizer.

2 X.Over Low 100Hz to 800Hz 360Hz

3 Default -

4 Cue Setting 1 Cue Mode *1 Mix / Solo Mix When set to Solo, audio from only one channel can be continually cued.

5 Head Phones EQ

1 EQ Hi -15dB to +15dB 0dB

Adjusts the equalizer settings for the headphones. 2 EQ Low -15dB to +15dB 0dB

3 Default -

6 EFX Send/Rtn 1 Unity Level Select -10dBV / 0dBV -10dBV Selects the signal level for the Effect Rtn with connected device.

7 USB Audio Setting

1 USB Assign Ch / Master Ch Selects whether to assign a channel to the USB audio input, or to add a Master/Cue bus.

2 OutputSourceSelect

1 USB1 / USB2

Non,CH1,CH2,CH3,CH4,Master,Re

c,Mic

Master

Selects the source output with the USB audio.

2 USB3 / USB4 Mic

3 USB5 / USB6 CH2

4 USB7 / USB8 CH3

3 Preset Input Select

1 CH1

USB1/USB2,USB3/USB4,

USB5/USB6,USB7/USB8,DVS

DVS Selects the source input with P1–P4.

2 CH2

3 CH3

4 CH4

4 Output Level VR -20dB to +20dB 0dB Selects the USB audio output level.

5 CH Input Level VR -20dB to +20dB -6dB Selects the level when USB audio is input into Channel 1–4.

6 Mas Input Level VR -20dB to +20dB -6dB Selects the level when USB audio is input into Master.

7 Cue Input Level VR -20dB to +20dB -6dB Selects the level when USB audio is input into Cue.

8 Digital Out Setting 1 Digital Output VR -20dB to +20dB 0dB Selects the output level for the Digital Out terminal.

9 X-Fader Setting

1 A Side Cut Position *2 -2.0mm to +8.0mm 0.0mm Adjusts the rise position for the A side cross fader.

2 B Side Cut Position *2 -2.0mm to +8.0mm 0.0mm Adjusts the rise position for the B side cross fader.

10 Beat Breaker Setting 1 to 5 1 Edits the custom pattern for the BeatBreaker.

2 System Setting

1 Sampling Frequency 44.1kHz / 48kHz / 96kHz 96kHz Selects the internal sampling rate for the unit.

2 PC/MAC*3 PC Mode / MAC Mode PC Mode Selects the type of connected computer when in device mode.

3 Version XXXX - Displays the version number.

3 MIDI Setting

1 MIDI INPUT CH 1 to 16, OMNI 1 Selects the USB MIDI INPUT CH.

2 MIDI OUTPUT CH 1 to 16 1 Selects the MIDI OUTPUT CH.

3 MIDI Output Enable

1 5Pin ON / OFF ON

Selects whether or not to output from MIDI.

2 USB ON / OFF ON

4 MIDI CLK

1 5Pin ON / OFF ON

Selects whether or not to output from MIDI CLOCK.

2 USB ON / OFF ON

5 MIDI Page 1 to 4 1 Selects the MIDI page for when the power is switched on.

6 V-LINK

1 Model V-4 / V-8 V-4 Selects the model connected to V-LINK.

2 Device ID 0x00 to 0x1F 0x10 Selects the Device ID for the device connected to V-LINK.

3 Trigger Level -40dBFS to 0dBFS -30dBFS Selects the level of trigger that switches the image effects when Ping Pong Delay is used.

4 Cross Fader Contour ON/OFF OFF Selects whether to reﬂ ect the crossfader curve on V-LINK.

5 Cross Fader

Enable / Disable Enable Selects whether or not to use each control with V-LINK.

6 Beat

7 Parameter

8 DRY/WET

9 EFX Button

10 FUNC1/FUNC2

4 Other Setting

1 Preset Export Exit / Execute*4 Exit Writes the Presets to the USB memory.

2 DN-X1600 Initialize Exit / Execute*5 Exit Returns settings to the factory settings. (Excluding the Owner Setting items)

5 Owner Setting Display only Displays the details of the Owner Settings.

*1 When SOLO is selected as the CUE mode setting, only one of the two CUE buttons, whichever was pressed last, becomes operational.

*2 The cut-off position of the Crossfader can be adjusted separately for each side.

*3 When the unit is connected to a computer which runs Windows XP, Vista or a similar operating system, select the PC Mode.

When it is connected to a computer which runs Mac OSX or a similar operating system, select the MAC Mode.

*4 The settings for these Preset and the Owner mode settings can be stored on an external USB memory or other memory device.

*5 The settings for these Preset are set to the factory settings.

Preset Items and Data

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Denon DN-X1600 User Manual Page 27

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-X1600