Denon DN-X800 Operations Instructions download pdf (Page 12)

ENGLISH

Track, minute, second and frame

displays

• These displays indicate current position

information.

Loop mode indicators

• DN-S5000 has Loop mode indicators consist of

four sets of A (A1, A2, A3, A4), B and two

arrows. A and B marks indicate A and B points

are exist.

• Two arrows indicate loop setting mode as

follow.

Example: A1 B

or Left arrow only on:

Hot Start mode

Both arrows on:

Seamless Loop mode

, Both arrows flashing:

Seamless Loop Playing

Left arrow on, right flashing:

Exit play from Seamless Loop

Time mode indicators

• When the TIME/T.TIME button is pushed, the

Time mode indicator switches as follows:

ELAPSED:

Track’s elapsed time is displayed.

REMAIN:

Track’s remaining time is displayed.

TOTAL + ELAPSED:

The total elapsed time of disc or

programmed track is displayed.

TOTAL + REMAIN:

The total remaining time of disc or

programmed track is displayed.

BA1

Parameter indicators

(upper 30 dots)

• Upper 30 dots on display indicate parameter,

data setting for Effector visually.

Character display

• You can select mode or function using

PARAMETERS knob following the short

message which is displayed on the character

display part.

• The character display indicates the operation,

mode name, data, etc., and displays such

guide messages as “Yes/Push_PM” means if

“YES”, push PARAMETERS knob. The display

indicates and marks sometime, note

that mark says you to turn PARAMETERS

knob and marks says to push

PARAMETERS knob.

• The PARAMETERS LED flashes when you can

use PARAMETER knob, otherwise this knob

used for Track Selection.

Play mode indicators

• When SINGLE indicator lights up, playback will

finish at end of current track.

• When CONT. indicator lights up, playback

continues.

KEY ADJ. indicator

• KEY ADJ. sign appears in display when in the

Key Adjust mode.

MEMO indicator

• MEMO sign appears in display when there is a

memory setting for the currently playing track

or the track at which the standby mode is

currently set.

CONT.

SINGLE

REMAIN

TOTAL

BA3

BA1

ELAPSED

DRAG S.

DUMP

BRAKE

RVS

ECHO

KEY ADJ.

PROG

MEMO

ww uye trq

!0 !2!1toi

(4) Display

PROG indicator

• This indicator lights up when program data has

been set and when program data is stored in

the memory.

Play Position indicators

(Play position indicator lower 33)

• Play position indicator:

The 33 white dots indicate where is playing

visually in a track in the normal play. The 11

Orange dots indicate play position in the

reverse play mode.

• End of Message:

When the time remaining to the end of the

track is less than the specified time, the EOM

(End Of Message) play position indicator

flashes along with the remaining time,

notifying of the track end.

✽ The EOM time can be set with the presets.

Pitch display

• This numeric indicator display the playback

speed (pitch).

PLATTER MODE indicators

• There are signs of Platter Effects DRAG S.,

BRAKE, ECHO, DUMP, RVS. These signs light

up when mode is on.

COMPACT DISCS

1. Precautions on handling compact discs

• Do not allow fingerprints, oil or dust to get on the

surface of the disc.

If the disc is dirty, wipe it off with a soft dry cloth.

• Do not use benzene, thinner, water, record spray,

electrostatic-proof chemicals, or silicone-treated

cloths to clean discs.

• Always handle discs carefully to prevent

damaging the surface; in particular when

removing a disc from its case or returning it.

• Do not bend the disc.

• Do not apply heat.

• Do not enlarge the hole in the center of the disc.

• Do not write on the label (printed side) with a

hard-tipped implement such as a pencil or ball

point pen.

• Condensation will form if a disc is brought into a

warm area from a colder one, such as outdoors

in winter. Do not attempt to dry the disc with a

hair dryer, etc.

2. Precautions on storage

• After playing a disc, always unload it from the

player.

• Always store the disc in the jewel case to protect

from dirt or damage.

• Do not place discs in the following areas:

(1) Areas exposed to direct sunlight for a

considerable time.

(2) Areas subject to accumulation of dust or high

humidity.

(3) Areas affected by heat from indoor heaters,

etc.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 48 49

Comments to this Manuals

No comments

Denon DN-X800 Operations Instructions Page 12

Comments to this Manuals

Related products and manuals for DJ controllers Denon DN-X800