Denon MULTEQXT AVR-4306 Operations Instructions Page 77
- Page / 146
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
72
Advanced Setup – Part 1 Advanced Setup – Part 1
• Down-converting from the component video signal to the S-
Video and composite video signal is possible only when the
resolution of a component video signal is 480i / 576i.
• When a non-standard video signal from a game machine or
some other source is input, the video conversion function
might not operate. If this happens, please set the conversion
mode to OFF.
• When the video conversion function has been used,
information such as that of text broadcasts which has been
added to the video signal might not be output. If this happens,
please set the conversion mode to OFF.
2
Press the CURSOR
DD
or
HH
button to select the
input source, then press the CURSOR
FF
or
GG
button to select the component video input
terminal.
Select from among 1-RCA to 3-RCA.
If the same component video input terminal is selected, the
setting for the input source that was previously assigned
switches to “NONE”.
When “Yes” is selected for “Default”, the settings are reset
to the default values.
3
Press the ENTER button to enter the setting.
• The “Video Setup” menu reappears.
Setting the Video Convert
Set whether or not to use the video conversion function.
1
Press the CURSOR
DD
or
HH
button to select
“Video Convert” at the “Video Setup” menu,
then press the ENTER button.
• The “Video Convert” screen appears.
2
Press the CURSOR
DD
or
HH
button to select the
input source, then press the CURSOR
FF
or
GG
button to select “ON” or “OFF”.
ON:
The convert function operates.
When there are multiple input signals, the input signals are
detected and the input signal to be output from the video
monitor output terminal is selected automatically in the
following order: component video, S-Video, composite video.
OFF:
The convert function does not operate.
The video signal input from the video input terminal is only
output to the video monitor out terminal.
The S-Video signal input from the S-Video input terminal is
only output to the S-Video monitor out terminal.
The component input signal input from the component input
terminals is only output to the component monitor output
terminals.
3
Press the ENTER button to enter the setting.
• The “Video Setup” menu reappears.
Setting the HDMI Out Setup
• Set whether to use the analog video signals to HDMI
conversion function.
• When using this conversion function, set the color format and
video range of the signals output from the HDMI terminal.
1
Press the CURSOR
DD
or
HH
button to select
“HDMI Out Setup” at the “Video Setup” menu,
then press the ENTER button.
• The “HDMI Out Setup” screen appears.
2
Press the CURSOR
DD
or
HH
button to select the
setting, then press the CURSOR
FF
or
GG
button to
select the parameter.
Analog to HDMI Convert:
• ON:
Setting for converting analog video signals into HDMI signals.
• OFF:
Setting for not converting analog video signals into HDMI
signals.
Aspect:
• FULL:
The video is output while maintaining the aspect ratio of the
input video.
This mode is suited for playing back 16:9 video.
• NORMAL:
A black band is added to the left and right of the input video
and the video is output.
This mode is suited for playing back 4:3 video.
Resolution:
• 480p/576p:
When the video signal being input is a video, S-Video or
480i/576i component video signal, the resolution is converted
to 480p/576p and the signal is output from the HDMI
MONITOR OUT terminal.
• 1080i:
When the video signal being input is a video, S-Video or
480i/576i/480p/576p component video signal, the resolution
is converted to 1080i and the signal is output from the HDMI
MONITOR OUT terminal.
• 720p:
When the video signal being input is a video, S-Video or
480i/576i/480p/576p component video signal, the resolution
is converted to 720p and the signal is output from the HDMI
MONITOR OUT terminal.
• Through:
The video signal being input is output as such from the HDMI
MONITOR OUT terminal without being converted.
- AVR-4306 1
- SAFETY INSTRUCTIONS 2
- 1. COMPLIANCE INFORMATION 3
- Getting Started 4
- 2 System setup menu 5
- “SERIAL NO 6
- Accessories 7
- Before using 7
- Cautions on handling 8
- Cautions on installation 8
- Inserting the batteries 8
- Part names and functions 9
- Front panel 9
- Remote control unit 10
- Rear panel 10
- Easy Setup and Operation 11
- 2 Connections 12
- Speaker connections 12
- 2 Speaker impedance 12
- Protector circuit 12
- Note on speaker impedance 12
- DVD player 13
- Auto Setup / Room EQ 14
- POWER switch 15
- Connecting Other Sources 19
- The video conversion function 20
- Connecting a TV tuner 21
- Connecting a DBS tuner 21
- Connecting a turntable 22
- Connecting a CD player 22
- Connecting a DVD recorder 23
- Connecting a VCR 23
- Connecting a tape deck 24
- DENON LINK connection 24
- Interface) terminals 25
- 2 Copyright Protection System 25
- 2 AM loop antenna assembly 26
- Connecting the XM terminal 26
- Monitor TV 27
- Power amplifier 27
- (ZONE2 or ZONE3) 27
- Basic Operation 29
- FUNCTION 30
- VIDEO SOURCE 31
- DVD 31
- ON SCREEN button 32
- STATUS button 32
- INPUT MODE button 32
- ROOM EQ button 33
- Playing modes for different 34
- STEREODIRECT 35
- DIRECT/STEREO 35
- PURE DIRECT 35
- SURROUND 36
- PARAMETER 36
- Offset -4dB 36
- Dial.Norm 36
- 2 Checking the input signal 37
- 2 Surround parameters q 37
- IIx” mode 38
- SURROUND PARAMETER button 38
- DEFAULT setting: 39
- USER MODE button for at 41
- CH SEL/ENTER 44
- TU (TUNER) button 45
- MEMORY BLOCK 46
- ON SCREEN 46
- Channel Category 47
- Song title/Artist name 47
- Channel name 47
- Channel number 47
- Radio ID 47
- SEARCH button in the XM mode 48
- Artists 49
- Playlists 49
- II or AMD processor, etc 51
- FUNCTION CURSOR ENTER 52
- ONE ALL OFF 55
- Advanced Operation 56
- MODE SELECTOR button for the 58
- SETUP button for at least 58
- 9, 7, 5 button (9 61
- 2, 6, 7, 8, 9 or 3) 62
- Lighting time 63
- SYSTEM CALL 64
- MODE SELECTOR 64
- MAIN ZONE 7.1-channel system 65
- MAIN ZONE 5.1-channel systems 66
- ZONE 2 ZONE 3 66
- AMP button 67
- VOLUME button on the 67
- FUNCTION knob 67
- ZONE2/3/REC SELECT button to 67
- SURROUND MODE 68
- RECOUT SOURCE 69
- Advanced Setup – Part 1 70
- [ On screen display ] 71
- IIx Cinema) 80
- Advanced Setup – Part 2 87
- OFF Audyssey 92
- FlatManual 92
- 1. Auto Setup/Room EQ 94
- 2. Speaker Setup 94
- 4. Video Setup 95
- 3. Audio Input Setup 95
- 5. Advanced Playback 96
- 6. Option Setup 96
- 7. Network Setup 96
- Additional Information 97
- Speaker setting examples 98
- Surround back 99
- Surround 100
- [2] DTS Digital Surround 101
- [3]DTS-ES 101
- 2 DTS-ES™ Discrete 6.1 101
- 2 DTS-ES™ Matrix 6.1 101
- Audyssey MultEQ XT 102
- Surround modes and parameters 104
- Windows Media DRM 104
- II/II x MUSIC MODE only 105
- IIx CINEMA 107
- IIx MUSIC 107
- Troubleshooting 110
- Specifications 111
- 10087, 10565 121
- SATELLITE 135
- TV/DVD Combination 2, 3 143
- TV/VCR Combination 3, 4 144
- TV/VCR/DVD Combination 2, 4 144
- CABLE/PVR Combination 1 144
- DBS/PVR Combination 1 144
- 4049041470 (default / défaut) 145
- TOKYO, JAPAN 146
Related products and manuals for AV receivers Denon MULTEQXT AVR-4306
(96 pages)
(60 pages)
AV receivers Denon AVR-390 Owner's Manual
(39 pages)
(39 pages)
AV receivers Denon AVR-S500BT Owner's Manual
(140 pages)
(140 pages)
© 2020, manymanuals.com. All rights reserved. | 2.799 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals